New release of 1s zoom 2.5. Documentation and educational materials

New 1C releases come out once a week. Update in a timely manner and always keep your databases up to date!

Table last updated by: — 12.07.2019.

1C technology platforms.

Typical configurations.

The 1C company is constantly developing its software solutions. For each program, key updates are released at least once a month.

In order to find out what platform release and configuration you have (if you don’t know what a platform and configuration is, look at this video),

open the program in “Configurator” or “1C Enterprise” mode and click this sign in the top menu.

A window like this will open.

At the top we read the number of your platform release, just below the configuration number.

Changes to the number in the last register of the release number are not so important. Although, here we also need to make sure that there is not a big gap, especially in platform releases. You need to pay special attention to the following register. If it changes and you have discrepancies, you must update.

We publish information on this page for our clients. If you have not found the name of your 1C program, call us and we will include it in this table.

In this article I will tell you how to update your existing configuration on the 1C 8.2 or 8.3 platform. For example, we will update the configuration of 1C Enterprise Accounting 8.2. The update is carried out in several ways: from the ITS disk, from the website users.v8.1c.ru, from the program itself. For basic version configurations, only the second and third methods are possible. Let's look at them all.

Before updating the configuration, you must create a backup copy of the infobase! After you do backup copy, you need to test and correct the information base and only then proceed with the update.

The configuration update files look like this:

Here we are interested in the setup.exe file, let's run it and install the update files:

Let's take a closer look at this installation step. The update files are installed in the 1C update templates directory. Only then are they used to update the configuration, i.e. By installing these files you will not update your database, this is a preliminary stage.

The default template directory is created in the Windows user folders, but I prefer to create this directory in the folder with the 1C program. I'll explain why. After updating the configuration, these files are no longer needed, and the easiest way is to remove them from there rather than delve into user folders.

This is a purely practical question, rational use of free space on your disk. You can safely install updates to the default directory. If you do install in a different directory, then you need to know the following. You must make sure that the program sees your template directory; to do this, run 1C again:

Select the “Settings” menu

Here we can make sure that the directory you selected is present in the 1C settings. If everything is in order, click further in the installation process.

We are waiting for the installation to complete.

If you are not interested in the description of the 1C update, uncheck the box and click “Finish”. The update template is installed.

Let's launch the 1C program:

Select the configurator launch mode.

The configurator opens.

Let's find out our configuration release. To do this, select “About” from the “Help” menu.

Here we can see the following information of interest to us:

The version of the 1c Enterprise platform - in this case 8.2.16.352. It is written about how to update the platform.

The mode is file, it means that you have a normal file database, not the 1C Enterprise server.

And what we need is Configuration, namely the name and version of the release - in this case 2.0.37.8.

Now we know what configuration release we have. Let's continue.

To be able to update the 1C configuration from the configurator, you need to open the configuration for editing. Click “Open configuration”.

After the configuration has opened, you should pay attention to the lock next to the configuration name. If it is, then your configuration matches the supplier's configuration, i.e. typical 1C.

If there is no lock, your configuration has been partially or completely deprecated to allow changes to be made. The procedure for updating such configurations differs from what is described in this article. We will consider the option when you still have a lock.

Select “Update configuration” from the Configuration => Support menu

Here you need to remove the bottom checkbox, because it is designed to search for updates on the Internet and click the “Next” button.

Here we see a list of available updates from the template catalog. There are two updates on my list. Why? The fact is that you can update the configuration by skipping one or more releases, if possible.

There is a 2.0.37.14 milestone update in my template directory. We'll skip it. You need to select the top update highlighted in bold and the word update must be present.

Select the release we need and click “Finish”.

Here we see that you can update the configuration to 2.0.38.6 from 5 previous releases. Click “Continue update”.

We see from which release and to which the update will be made. Click “OK”.

The answer to the program question is “Yes”.

In this window we see which configuration objects have been added, changed, etc. Click “Accept”.

By opening the menu item Help => About the program after completing the operations, we can make sure that the release of our configuration has been updated.

Updating the configuration from the site users.v8.1c.ru.

To update the configuration from the site, you must have a valid ITS subscription. The basic version does not require an ITS subscription. Updating from the site occurs by downloading the update distribution and installing it.

So, we will assume that you have a login and password to access the site. If they are not there yet, see the article “ Self-registration users by PIN code.” Open any browser you have and enter the name of the site in the address bar:

We go to the site, enter your username and password and click “Login”:

We find ourselves in the summary information section:

Scroll down and find the section “Enterprise Accounting, Edition 2.0 for Technology Platform 8.2”. Click on the name of the configuration. If you have a different configuration, look for it in the list.

A list of available releases opens. We are interested in the latest one, in this case 2.0.38.6. We also see that this release is an update to version 2.0.37.8. This means that it is not necessary to install intermediate releases. Click on the latest release number.

In the window that opens, we see that “The current version of the configuration is intended for use with a version of the 1C:Enterprise 8.2 system not lower than 8.2.15.319.” This means that if the version of your platform is lower than the one indicated, you need to update it. How to do this is written here. Click on “Update distribution”.

After downloading, we have an update file.

Unpack it to the directory you need:

Updating the basic configuration of 1C 8.2 or 8.3.

The basic configuration is updated from the program itself: menu Tools => Configuration Update. To update, you need a login and password from the site users.v8.1c.ru.

Before updating, the program automatically creates a backup copy of the database, but I recommend either immediately finding where it was made (By searching the system disk for files with the dt extension) and moving it to the folder with archive copies, or making a backup copy manually through the configurator.

Hello dear readers of the zup1c blog. Last week, namely June 23, 2014, a new release of the 1C Salary and Personnel Management program was released under number 2.5.82. This article will talk about the innovations that the developers of 1C have prepared for us. In addition to this, I will also consider release 2.5.81, since I did not do so a month ago at the time of its release (05/26/2014).

Briefly about the innovations of these two releases (there are not many of them):

• 2.5.81:
  • A separate form has appeared for editing an employee’s length of service when preparing reports to the Pension Fund;
  • Ability to print each document separately (as protection against freezing);
  • In the workplace for preparing PFR information, a selection of SZV information or batches of Section 6 documents created directly in the document journal has been implemented;
  • The Republic of Crimea and the city of Sevastopol have been added to the KLADR.
• 2.5.82:
  • Preparation of reports to the Pension Fund: in the absence of income, the information is filled in with zero values;
  • New regulated report “Declaration of Conformity of Working Conditions”;
  • .

Let me remind you that all articles from this series of reviews about 1C ZUP updates can be found in the section. Also, for those who want to update the program themselves, the following articles may be useful:

Release 2.5.81

✅

✅

✅

Now in more detail and with pictures for each item.

A separate form has appeared for editing an employee’s length of service when preparing reports to the Pension Fund of Russia

In the workplace for preparing data for transfer to the Pension Fund, in the section that reflects the surname composition of the pack, a new button “Seniority” has appeared. It opens in a separate form information about the length of service of the current, selected employee and allows you to edit and save this information. I think this is a good decision by the 1C developers, which could have been implemented a long time ago. The accountants with whom I worked often complained that this information did not fit on their monitors and was generally displayed small and uninformative.

Possibility of printing separately each of the documents “Pack of documents of section 6 of the RSV-1 Calculation”

To the document “A bundle of documents from Section 6 of the RSV-1 Calculation” was added printed form“Personalized accounting information; pack No.__.”

If the computer still freezes when printing even 200 pieces of information, then it’s worth analyzing the volume random access memory, processor and, in general, all characteristics that affect performance. For analysis, you can use the simple and free program CPU-Z, which does not even require installation.

In the workplace for preparing PFR information, a selection of SZV information or batches of documents of Section 6 created directly in the document journal has been implemented

✅ Seminar “Lifehacks for 1C ZUP 3.1”
Analysis of 15 life hacks for accounting in 1C ZUP 3.1:

✅ CHECKLIST for checking payroll calculations in 1C ZUP 3.1
VIDEO - monthly self-check of accounting:

✅ Payroll calculation in 1C ZUP 3.1
Step-by-step instruction for beginners:

The workstation for preparing information for transfer to the Pension Fund of Russia is intended to automate the formation of packs of information in Section 6 of the RSV-1 directly from the workstation. However, by opening the list of documents “Pack of documents of Section 6 of the RSV-1 Calculation”, you can create a stack directly from the form of this document. In order that this document could then be attached to RSV-1 and other kidneys created in the workplace, the “Selection” -> “Packs of Section 6 documents” button was added. You can also select packs SZV 6-4 and packs SZV 6-1, which were not created in the data preparation workplace for the Pension Fund. Although information in the SZV format is not currently used, it may be present as corrective information.

The Republic of Crimea and the city of Sevastopol were added to the KLADR

The KLADR was updated, which now includes new subjects of the Russian Federation: the Republic of Crimea and the city of Sevastopol. These subjects were included in the Russian Federation in accordance with the Federal Constitutional Law of March 21, 2014 No. 6-FKZ and the Decree of the President of the Russian Federation of March 21, 2014 No. 168.

Release 2.5.82

Preparation of reports to the Pension Fund of the Russian Federation: in the absence of income, the information is filled in with zero values

In previous releases, when preparing information to the Pension Fund, if the employee did not have income for reporting period, then the income table for it was not filled out at all. Now, in accordance with the new procedure for generating this information, for such employees a line with zero income is filled in, but with the category of the insured person filled in.

New regulated report “Declaration of Conformity of Working Conditions”

The regulated reporting includes a new report intended for compiling information in the form approved by Order of the Ministry of Labor dated 02/07/2014 No. 80 n - “Declaration of Conformity of Working Conditions.” This report is available from the list of regulated reports, which can be accessed on the “Taxes” tab of the program desktop using the link "Regulated reports".

Automation of filling in the work experience information about working conditions for certain types of absence: MEDNETRUD and MONTH

✅ Seminar “Lifehacks for 1C ZUP 3.1”
Analysis of 15 life hacks for accounting in 1C ZUP 3.1:

✅ CHECKLIST for checking payroll calculations in 1C ZUP 3.1
VIDEO - monthly self-check of accounting:

✅ Payroll calculation in 1C ZUP 3.1
Step-by-step instructions for beginners:

Release 2.5.82 implements automatic completion of information about working conditions when creating records of experience for periods reflected in the DAM-1 as:

• “Transfer of a pregnant woman to “light” labor” (MEDNETRUD);
• “Translation according to production. necessity for a period of no more than one month from a job that gives the right to early retirement to another job that does not give this right” (MONTH).

Previously, information about working conditions was not filled out.

That's all for today! Soon there will be new interesting materials on.

To be the first to know about new publications, subscribe to my blog updates:

Let's take a closer look at the process of updating the 1C configuration via the Internet using the example of the 1C Accounting 8 program. If you are using version 1C 7.7 - .

Stage null:

This often happens when the configuration has not been updated for a long time and an update is needed for a large number of releases. To determine the version and find out the current version, you need to go to the “Help - About the program” section in the main menu:

The configuration must have support installed (with a lock):

After that, select “Support - Update configuration” in the “Configuration” menu:

In the 1C window that appears, select “Search for available updates”, then check the box as in the screenshot:

Select a release in the list and click “Finish”.

That's all, yours 1C program has the latest release!

If it still doesn’t work out for you or you don’t have a standard configuration, you should under no circumstances try to update the database yourself - this is fraught with data loss. Talk to .

Although a new version The 1C technology platform, version 8.3, has been on the market for quite some time; many enterprises and private entrepreneurs, for a variety of reasons, still use previous versions, in particular 8.2. It would seem that 8.2 is just previous version, but information, for example, how to install an update for 1C 8.2, has become increasingly difficult to find lately. This request, by the way, is not entirely correct, and here’s why: the latest current release of the 8.2 platform was released at the beginning of 2013, as can be seen in the screenshot from the official 1C user support website.

And the latest versions of old editions of 1C Accounting generally work only on the 8.3 platform, and updates for 1C 8.2 are not available.

Therefore, there is no point in telling how to update the 8.2 platform (due to the fact that there is no update history), and users, as a rule, mean the process of updating configurations on the 1C 8.2 platform, such as Accounting, Salary, Trade Management, etc. d.

Therefore, in this article we will look at updating the 1C database on platform 8.3 using the example of the Enterprise Accounting version 2.0 configuration. The edition is considered old, but is still supported by 1C due to a fairly large number of users.

So, first of all, to update the configuration, we need to understand which configuration release we have installed. To do this, we need to launch the configuration in any mode and select* in the main menu:

*Or press the button "i" at the top right side of the screen.

We will see a window with configuration information:

At the top of the window we see the version of the 1C platform on which our configuration is running. Below it is information about the configuration (name, edition, release number). It is the configuration release (indicated in parentheses) that we need. The fact is that each 1C configuration update is intended for specific releases.

Next, we need to understand which release we can update the configuration to. To do this, go to the 1C user support site (users.v8.1c.ru). We must have a login and password for the site. If not, then in the form for entering your login and password there is a “Register a new user” button.

Next, go to section 1C: Software updates – Download software updates – Typical 1C configurations for Russia – Enterprise accounting, edition 2.0. We will see a list of configuration releases available for download.

As we remember, we have Enterprise Accounting release 2.0.66.29. In the “Version Update” column we see configuration releases to which the update can be installed. We were lucky. The latest configuration release at the moment is suitable for updating from our release. This means that we can update directly to it, bypassing intermediate versions.

Select the desired release and click on it. On the next page we see a list of materials available for download. We are interested in the “Update distribution” item.

We are interested in the Setup.exe file. We launch it by double-clicking and get into the configuration installation program.

In the next window we will be asked to select the location for installing the configuration templates. You can choose it at your discretion. The main thing is not to forget where you will install the templates.

The update template is installed, and we enter our database. It must be launched in configurator mode.

Having entered the database in configurator mode, the first thing we must do is unload the database. This must be done so that in case of errors, when an update occurs, power outages or other emergency situations, we can restore the database from the archive.

To do this, in the main menu, select the item “Administration” - “Download infobase”.

The program will ask you to specify the download path. We specify the path*, after which the uploading process begins. It can take, depending on the power of the computer and the size of the database, from a minute to 7 – 10 minutes. The fact that the database is currently being unloaded is indicated by the inscription in the lower left corner:

After the upload is complete, the following window will appear:

As you can see, both during the upload process and in the message about its completion, the path that we specified is displayed. One nuance must be taken into account: during the unloading process, as well as during the updating process, no one should be in the database except us.

The preparations are complete, which means you can start directly updating the database configuration. Let's go to the main menu. We are interested in the submenu “Configuration” - “Open configuration”. A configuration window that looks like this opens:

Again go to the menu “Configuration” - “Support” - “Update configuration”.

The program will offer to find a template to update or specify its location manually.*

*In essence, they are no different, but searching for updates may take some time, depending on the size of the hard drive on which we installed the template. Therefore, we will specify the path to the templates manually.

Specify “Select update file” and click “Next”.

The program will prompt you to specify the path to the file containing the update. We indicate the path to the folder where the template was installed, and in the folder with the template, select the file “1cv8.cfu”. Click “Next”.

The next window will contain general information about the update. After reviewing, if necessary, proceed to “Continue updating”.

The program will provide brief information about which configuration is being updated, from which release and to which one. Click "OK".

During the update process, a percentage bar will appear in the lower left corner several times to indicate the progress of certain update steps.

We wait until the following window appears:

Click “Yes” (otherwise, why would we even bother with the update?).

The program will display a window for reorganizing information. It displays information about changes/adding metadata objects during the update process.

We are waiting for the inscription to appear in the lower left corner:

It means that the update in configurator mode has been completed. Until this inscription appears, any manipulations with the database other than those described above will be impossible.

The update is complete and we are moving on to launching the database in enterprise mode. This action can be performed directly from the configurator by pressing the F5 key or the button in the upper left corner:

In Enterprise mode, the first window that will appear is:

Select “I confirm the legality of receiving the update in accordance with the above conditions” (otherwise the update will not be completed and the program will close) and click “Continue”.

We wait until the message “Update” appears at the bottom of the service message window. information base completed successfully." This will mean the successful completion of the process. The program will display a window with a list of changes, which you can study or close immediately.

We're done and can start working on the updated database version 8.2.