Rear light with turn signals and Signal Pod for bicycle. What are turn signals for a bicycle and how to make them Remote turn signals without wires

Signal Pod V3.0 is a wireless bicycle turn signal system for everyday use. It consists of waterproof: a main unit with flashing arrows and a remote control. The flashing arrows are made from energy-efficient LEDs. The main unit can be easily mounted and removed under the seat on the seatpost. Signal Pod V3.0 is designed in such a way that the arrows will not work if the Signal Pod is not positioned in line with the "UP" indicator.

Buy Rear light with turn signals and Signal Pod for bicycle

Credit. Rear light with turn signals and Signal Pod for bicycle

In stock

• Article: 121545
• CG-891R is a large, waterproof and energy-saving flashlight for cyclists. It is necessary to improve security traffic. Thanks to this flashlight, you become more visible on the highway in the dark. It is securely attached to the end of the steering wheel. Equipped with a motion sensor. Supplied complete with batteries.

In stock

• Material: plastic
• Peculiarities: 4 red LEDs
• Modes: 3 modes

• Material: plastic
• Peculiarities: 4 red LEDs
• Modes: 3 modes
• Colors (produced): red-black
• Article: 122028
• This non-standard marker light will be very useful for cyclists, who often ride in the evening, because road safety is the main thing. Red LEDs in the amount of 4 pcs. are attached to the ventilation holes of the helmet. The device runs on a CR2032 battery and has 3 modes.

In stock

• Brand: Jing Yi
• Model: JY-267-1A
• Material: Silicone/Plastic
• Fastening:
• Colors (produced):

• Brand: Jing Yi
• Model: JY-267-1A
• Material: Silicone/Plastic
• Fastening: on the handlebar / on the seatpost ⌀25-31.8 mm
• Colors (produced): white, green, red, blue, purple
• Available color: violet; green; syn
• Article: 124829
• A set of compact decorative lamps JY-267-1A will help you identify yourself on city roads and signal cars at dusk. The front light with a white LED is mounted on the handlebar, the rear red light is mounted on a seatpost with a diameter of 25-31.8 mm. The body and clamp of the flashlight are made of elastic, waterproof silicone. For power, you need two CR2032 batteries (tablets). Available colors: white, green, red, blue, purple.

In stock

• Brand: Stels
• Model: JY-320F/320T
• Material: silicone/plastic
• Peculiarities:
• Colors (produced):

• Brand: Stels
• Model: JY-320F/320T
• Material: silicone/plastic
• Peculiarities: 2 pieces included (white and red LEDs), for 2xCR2032 batteries
• Colors (produced): white, yellow, orange, pink, blue, black
• Available color: red; yellow; roses
• Article: 124138
• Decorative flashlights JY-320F/320T will indicate your presence on the road and make riding at dusk safer. The soft silicone case with an elastic clamp is suitable for mounting on the steering and seat tubes. A flashlight with a white LED is installed at the front, and a red one at the rear. The lights require two CR2032 batteries to operate. Six color options will allow you to choose the lights that suit your bike: white, yellow, orange, pink, blue, black.

In stock

• Brand: STG
• Model: TL-1503
• Material: Plastic
• Peculiarities: 5 red/white LEDs
• Fastening:

• Brand: STG
• Model: TL-1503
• Material: Plastic
• Peculiarities: 5 red/white LEDs
• Fastening:
• Article: 125389
• An affordable kit for evening cycling. Consists of a front light STG TL1503 and a rear light STG TL5388. Each flashlight has 5 LEDs of the corresponding color. You will need 4 AAA batteries to power the front light, and 2 x AAA batteries for the rear light (not included). Mounting: on the handlebars and seatpost.

In stock

• Brand: Stels
• Model: JY-813A
• Material: plastic
• Peculiarities: for AAAx4 + AAAx2 batteries
• Fastening:
• Modes: 3 operating modes
• Colors (produced): silver/red

• Brand: Stels
• Model: JY-813A
• Material: plastic
• Peculiarities: for AAAx4 + AAAx2 batteries
• Fastening: on handlebar/seat tube
• Modes: 3 operating modes
• Colors (produced): silver/red
• Article: 123829
• The JY-813A set of flashlights will greatly protect your riding at dusk. The set includes a bright front light, which is easily installed on the handlebar using an adjustable clamp and runs on four AAA batteries, and a rear marker with fixation on the seat tube (2 AAA batteries). Each has 3 operating modes. Material - plastic.

In stock

• Brand: Stinger
• Model: STG FL-1203
• Material: Aluminum / Plastic
• Fastening: On the handlebar / on the seatpost
• Weight: 210 g
• Manufacture: China
• Colors (manufactured): black/red

• Brand: Stinger
• Model: STG FL-1203
• Material: Aluminum / Plastic
• Fastening: On the handlebar / on the seatpost
• Weight: 210 g
• Manufacture: China
• Colors (manufactured): black/red
• Article: 125148
• Lighting kit from STG, consisting of a front light FL-1203 and a rear light TL-5424. The front light is made in a compact aluminum housing, with a bright white LED with a power of 3 watts. Runs on three AAA batteries (not included). Can be used separately from the mount. The rear one is made of plastic, inside there are two red LEDs with a power of 0.5 watts. Requires two AAA batteries (not included) to operate. The weight of the lanterns with packaging is 210 grams.

In stock

• Brand: STG
• Model: FL-1536
• Material: Plastic
• Features: USB charging
• Fastening: On the handlebar / On the seatpost
• Colors (manufactured): Black/red

• Brand: STG
• Model: FL-1536
• Material: Plastic
• Features: USB charging
• Fastening: On the handlebar / On the seatpost
• Colors (manufactured): Black/red
• Article: 125310
• STG FL-1536 is a useful lighting kit for your bike, consisting of a powerful FL1536 front light and a BCTL5477 rear light. Each flashlight is recharged via USB (wires included) and has a quick mount with silicone clamps. The front light produces a luminous flux of 220 lumens with a battery capacity of 1000mAH. The kit is sold in individual STG packaging.

In stock

• Brand: BBB
• Model: EcoCombo BLS-76
• Material: plastic
• Peculiarities:
• Fastening:
• Development: Netherlands
• Colors (manufactured): black/red

• Brand: BBB
• Model: EcoCombo BLS-76
• Material: plastic
• Peculiarities: BLS-75 EcoBeam front light and back light BLS-78 RedLaser, 5 AAA batteries
• Fastening: universal silicone clamp
• Development: Netherlands
• Colors (manufactured): black/red
• Article: 123075
• A quality kit consisting of a BLS-78 RedLaser rear marker light and a BLS-75 EcoBeam front light. These accessories will be quite enough to ride safely in the dark. Attached to the handlebars and seatpost using an adjustable silicone clamp. The package also includes 5 AAA batteries required for operation (3+2). The case is made of plastic and is reliably protected from water.

In stock

• Brand: STG
• Model: FL-1544A
• Material: Plastic
• Peculiarities:
• Fastening: On the handlebar / On the seatpost
• Colors (manufactured): black/red

• Brand: STG
• Model: FL-1544A
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Colors (manufactured): black/red
• Article: 125397
• A set of flashlights from STG that will provide you with safe movement in twilight and urban conditions. The package includes a front light FL-1544A with an external feed button sound signal(300 lumens, ringing power 120 dB, battery capacity 1200 mAh), as well as a compact rear flashlight BCTL5477 with quick mount. Devices are charged via USB. The case is protected from moisture and dust.

In stock

• Brand: Cat Eye
• Model:HL-EL135/ORB
• Material: Aluminum / Plastic / Silicone
• Peculiarities:
• Sizes (manufactured):
• Fastening: On the handlebar / On the seatpost
• Weight: 74 / 26 g
• Modes:
• Manufacture: Japan
• Colors (manufactured): black

• Brand: Cat Eye
• Model:HL-EL135/ORB
• Material: Aluminum / Plastic / Silicone
• Peculiarities: 3 x White LED, 2 x AA / 1 x Red LED, 2 x CR2032
• Sizes (manufactured): 84 x 36 x 26.5 mm / 26 x 26 x 31 mm
• Fastening: On the handlebar / On the seatpost
• Weight: 74 / 26 g
• Modes: 2 modes (up to 320 h) / 3 modes (up to 100 h)
• Manufacture: Japan
• Colors (manufactured): black
• Article: 125186
• Japanese made light kit including Cat Eye HL-EL135 front light and Cat Eye ORB rear light. The headlight is made of plastic, the design uses 3 LEDs, as well as proprietary OptiCube lenses. The power is enough to illuminate 10 m in front of the bike. The flashlight has 2 operating modes (up to 320 hours) and requires two AA batteries for power. The compact Cat Eye ORB tail light attaches with a silicone clamp and operates in three modes, up to 100 hours depending on the mode. Powered by two CR2032 batteries. Weight: 74 / 26 grams.

In stock

• Brand: Cube
• Material: Plastic
• Sizes (manufactured):
• Fastening: On the handlebar / on the seatpost
• Weight:
• Colors (manufactured): black

• Brand: Cube
• Model: RFR Lighting Set Tour 15
• Material: Plastic
• Sizes (manufactured): Front - 90x39x37 mm / Rear - 42x30x22 mm
• Fastening: On the handlebar / on the seatpost
• Weight: Front - 123 g (with battery) / Rear - 93 g (with battery)
• Colors (manufactured): black
• Article: 125152
• The RFR Lighting Set Tour 15 is a great touring set that will keep you riding safely. highways. Convenient adjustable fasteners allow you to place them in the desired position. The plastic case is reliably protected from moisture. Light weight: front - 123 g (with battery) / rear - 93 g (with battery). Black color.

In stock

• Brand: Sigma
• Model: Aura 25/Cubic
• Material: Plastic
• Peculiarities:
• Fastening: On the handlebar / On the seatpost
• Weight: 70 / 38 g
• Modes:
• Development: Germany
• Colors (manufactured): black/red

• Brand: Sigma
• Model: Aura 25/Cubic
• Material: Plastic
• Peculiarities: Front - over bright LED Osram, 25 Lux, 2x AA (included) / Rear - Osram Super Bright LED, 25 Lux, 2x AAA (included)
• Fastening: On the handlebar / On the seatpost
• Weight: 70 / 38 g
• Modes: Front - 5 hours (standard), 7 hours (Eco mode) / Rear - 20 hours (standard)
• Development: Germany
• Colors (manufactured): black/red
• Article: 125189
• A set of bright flashlights from Sigma, designed for safe riding in the dark and on highways. Assembled from two models. Front light Sport Aura 25: - Plastic body - Handlebar mount (22-32 mm) - Lighting range 30 m - 2 modes - standard 5h / economy 7h - 2 x AA batteries - Weight 70 grams Tail light Sigma Cubic: - Plastic body - Seatpost mount - Visibility up to 400 m - Operating time up to 20h - 2 x AAA batteries - Weight 38 grams

In stock

• Brand: BBB
• Model: SquareCombo BLS-102
• Material: Plastic
• Peculiarities:
• Fastening: On the handlebar / on the seatpost
• Weight: 88/61 g (front/rear)
• Manufacture: Taiwan
• Development: Holland
• Colors (manufactured): black/red

• Brand: BBB
• Model: SquareCombo BLS-102
• Material: Plastic
• Peculiarities: SquareBeam (BLS-101K) and RearLaser (BLS-78)
• Fastening: On the handlebar / on the seatpost
• Weight: 88/61 g (front/rear)
• Manufacture: Taiwan
• Development: Holland
• Colors (manufactured): black/red
• Article: 125000
• Light kit consisting of a front SquareBeam (BLS-101K) and a rear RearLaser (BLS-78). The SquareBeam front light is mounted on the handlebar, equipped with a powerful 1W LED, runs on 4 AAA batteries, and has a charge indicator. Provides a luminous flux of 107 lumens. Operating time - 6 hours. Rear RearLaser with three LEDs is mounted on the seatpost, requires two AAA batteries to operate, provides up to 240 hours of operation. The luminous flux is 1 lumen. Light weight (front/rear): 88/61 grams.

In stock

• Brand: Sigma
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 62 / 24 g
• Modes:
• Development: Germany
• Colors (manufactured): black/red

• Brand: Sigma
• Model: Buster 100 / Nugget II Flash
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 62 / 24 g
• Modes: Front - 2 hours (bright), 4 hours (standard), 8 hours (economy), 9 hours (flashing/fast flashing), 10 hours (SOS mode) / Rear - 5 hours (standard), 2 hours (bright) , 8 h (flashing)
• Development: Germany
• Colors (manufactured): black/red
• Article: 125196
• A bicycle lighting kit created by the German company Sigma for safe riding in the evening and at night. Sigma Buster 100 front light: - Waterproof plastic housing (IPX4) - Quick mounting on the handlebars without tools - Can be mounted on a helmet - Tactile on/off button - Light output up to 120 lumens - Lighting distance 35 m - Two levels of charge indication - Operating time up to 10 hours (6 modes) - Full charge from USB in 2 hours - Weight 62 grams Sigma Nugget II Flash taillight: - Plastic body - Fresnel lens for effective dispersion - Visibility up to 400 m - Two levels of charge indication - Operating time up to 8 h (3 modes) - Full charge from USB in 2 hours - Weight 24 grams

In stock

• Brand: Cube
• Material: Plastic
• Sizes (manufactured):
• Fastening: On the handlebar / On the seatpost
• Weight: 67 g
• Modes:
• Development: Germany
• Colors (manufactured): black/red

• Brand: Cube
• Model: ACID Light Set Pro 30
• Material: Plastic
• Sizes (manufactured): Front - 53 x 51 x 32 mm / Rear - 26 x 44 x 24 mm
• Fastening: On the handlebar / On the seatpost
• Weight: 67 g
• Modes: Front - normal (4 hours), bright (2 hours) / Rear - bright (3 hours)
• Development: Germany
• Colors (manufactured): black/red
• Available color: black
• Article: 125163
• The ACID Light Set Pro 30 flashlight set is new for 2019 with a unique design that has already been noted at several exhibitions. The compact flashlights feature bright LEDs with lithium polymer batteries and quickly charge via USB. Made from durable plastic. Attached using universal silicone clamps. Dimensions: front - 53 x 51 x 32 mm / rear - 26 x 44 x 24 mm. Weight - 67 grams. Black color.

In stock

• Brand: Cube
• Model: Light Set LTD+
• Material: Plastic
• Sizes (manufactured):
• Fastening: On the handlebar / On the seatpost
• Weight: 70 g
• Modes:
• Development: Germany
• Colors (manufactured): black

• Brand: Cube
• Model: Light Set LTD+
• Material: Plastic
• Sizes (manufactured): Front / Rear - 59 x 35 x 34 mm
• Fastening: On the handlebar / On the seatpost
• Weight: 70 g
• Modes: Front / Rear - flashing (4 hours), constant (2.2 hours)
• Development: Germany
• Colors (manufactured): black
• Available color: black
• Article: 125164
• The Cube Light Set LTD+ set of flashlights will be useful to you on tourist trips, as well as when driving on roads. Two LED lights of identical design are mounted on the handlebars and seatpost using silicone clamps. They operate in two modes - flashing and constant. Made of high quality plastic, protected from moisture. The entire set weighs only 70 grams. Black color.

In stock

• Brand: Sigma
• Model:
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 72 / 24 g
• Modes:
• Development: Germany
• Colors (manufactured): black/red

• Brand: Sigma
• Model: Roadster USB/Nugget II Flash
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 72 / 24 g
• Modes: Front - 3.5 hours (standard), 5 hours (economy) / Rear - 5 hours (standard), 2 hours (bright), 8 hours (flashing)
• Development: Germany
• Colors (manufactured): black/red
• Article: 125197
• A set consisting of two German-made flashlights from the Sigma company. Suitable for active riding at night and for tourist trips. Roadster USB front light: - Waterproof plastic housing (IPX4) - Tool-free silicone handlebar mount - Tactile on/off button - Illumination 25 lux - Lighting distance 30 m - Two levels of charge indication - Operating time up to 5 hours (2 modes) - Full charge from USB in 2.5 hours - Weight 72 grams Sigma Nugget II Flash tail light: - Plastic body - Fresnel lens for effective dispersion - Visibility up to 400 m - Two levels of charge indication - Operating time up to 8 hours (3 modes) - Full charge from USB in 2 hours - Weight 24 grams

• Brand: Cube
• Model: ACID Light Set Pro 40
• Material: Plastic
• Sizes (manufactured): Front - 92 x 39 x 35 mm / Rear - 26 x 44 x 24 mm
• Fastening: On the handlebar / On the seatpost
• Weight: 117 g
• Modes: Front - normal (6 hours), bright (3 hours) / Rear - bright (3 hours)
• Development: Germany
• Colors (manufactured): black/red
• Available color: black
• Article: 125165
• ACID Light Set Pro 40 is a lighting kit designed for active riding after sunset. Powerful LEDs immediately catch the eye of motorists, increasing your level of safety. The large front light (92 x 39 x 35 mm) is mounted on the handlebars, and the rear marker light is mounted on the seatpost. Time and operating modes: front - normal (6 hours), bright (3 hours) / rear - bright (3 hours). The weight of the set is 117 grams. USB charging.

In stock

• Brand: Sigma
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 96 / 35 g
• Modes:
• Development: Germany
• Colors (manufactured): white

• Brand: Sigma
• Model: Sportster/Mono RL K-Set
• Material: Plastic
• Peculiarities: USB charging, waterproof housing
• Fastening: On the handlebar / On the seatpost
• Weight: 96 / 35 g
• Modes: Front - 7 hours (standard), 3.5 hours (economy) / Rear - 7 hours (constant), 8 hours (flashing)
• Development: Germany
• Colors (manufactured): white
• Available color: white
• Article: 125211
• A set of high-quality flashlights from the German company Sigma, which makes riding in the dark safer. Includes two Sportster and Mono RL models. Sigma Sportster front light: - Waterproof housing (IPX4) - Adjustable mount 22-32 mm - One bright High Power LED - Illumination up to 40 lux - Lighting distance 50 m - Double click on - Five-stage charge indicator - Run time up to 7 hours ( standard) - USB charging - Weight 96 grams Sigma Mono RL taillight: - Waterproof housing - Quick attachment without tools - Visibility up to 400 m - Two-stage charge indicator - Operating time 7/8 hours (steady/flashing) - USB charging - Weight 35 grams
• Colors (produced): black-red
• Article: 122032
• An interesting bicycle light in the shape of a spider will be an attractive addition to a children's bike. Your child's delight from this gift is guaranteed! In addition, it will increase visibility on the roads and guarantee the required level of safety. The light mount is located on the wheel spokes and turns on automatically when the bike moves.

You can see a cyclist on the roads almost every day. When going out on the same path as cars, he must be well prepared and follow the basic rules of the road on an equal basis with drivers of other Vehicle. A mandatory requirement in traffic regulations is the timely and accurate delivery of turn signals.

And if cars are entirely equipped with bright yellow turn signals, then it is still rare to see turn signals on a bike.

The standard signal for a cyclist to maneuver is to extend his arm to the right or left, respectively. Previously, motorcycle drivers also announced their intentions in exactly the same way, until they were fully equipped with light turn signals. Whether this will be the case with bikes without an engine is still unknown.

Nevertheless, turn signals for bicycles do exist as an additional accessory, and for a person who puts safety first, they can play a significant role.

What are bicycle turn signals?

The signaling system can be installed to complement the main lighting - front and rear lights. It is a three-section flashlight that is controlled special block, attached to the steering wheel. The block and lights are connected to each other by wires. All the cyclist needs to do is press a button on the remote control, and the light will blink on its own. Everything is the same as in the car!

The signaling system lamp consists of parts:

• left turn - orange flashing light;
• stopper – a bright red non-blinking light;
• right turn - flashing yellow lamp (analogous to the left turn signal).

Stopper light, rotating sections, switch

The active areas of the turn signal lamps can be made in the form of arrows in the corresponding direction, but this does not change the essence. When installing rear turn signals, a standard flashlight acts as a marker. It usually has several flashing and non-blinking modes. As soon as you start driving with turn signals, it is better to switch the “standard” light to non-blinking mode so as not to mislead drivers when the lights turn on.

Advantages and disadvantages

What is better and more correct: inform about maneuvers with an outstretched arm or use light signals? At first glance, the answer is obvious - the second option is much safer. But let’s not rush, this method also has both light and dark sides. As they say, it's a double-edged sword.

When giving signals using an outstretched arm, it is not always possible to keep the steering wheel in a straight position, especially if the leading hand is released from it. Needless to say, road instability is a safety hazard?

With turn signals everything is simpler: just press the button. In addition, giving a hand signal is done only before a turn, and at this time not all drivers will be able to see it. The turning lights turn on throughout the entire turn.

The bulbs are almost invisible during the day, especially in the sun. Perhaps this can be attributed to their significant disadvantage. In the dark and twilight, light has an advantage over the standard method, unless, of course, the cyclist decides to put LED strips on his hands.
But if dynamics and acceleration are of fundamental importance, then it is not recommended to install turn signals on a bicycle. Why? It's simple: any suspended device will increase the weight, which makes itself felt very well in motion.

Remote turn signals without wires

An advanced version of the light signal system is used on steep bikes riding on roads. The key features of wireless turn signals are, of course, the absence of wires from the control unit to the bulbs and good visibility even in very good natural light. Every car driver will take into account such a cyclist, and on equal terms. It goes without saying that the “coolness” of such a device does not free the cyclist from the need to give a signal in advance and control the traffic situation.

Lights and control unit for remote turn signals

The kit of such devices includes special batteries and chargers. An additional function – “hazard warning light” – will allow you to indicate a stopped bicycle in the wrong place, as well as signal bike malfunctions to other cyclists if, for example, they are moving in a group.

This option is perfect for cyclists who often cross open spaces along busy city streets and highways. The disadvantage is, of course, the high cost.

We make turn signals ourselves

Among cycling enthusiasts, there are those who wonder whether it is possible to make turn signals for a bicycle yourself. In principle, there are no difficulties, although, of course, buying a ready-made unit will be much easier. Save time that more expensive than money. However, let’s touch on the topic of how to make turn signals in a garage or home.

For assembly you will need the following:

1. Two flashlights.
2. Postings.
3. Power cable. You can use regular USB.
4. Toggle switches, they are also switches.
5. The platform for installing flashlights is light plywood, a plastic platform or a metal frame product.
6. Clamps for securing the cable to the frame.

When assembling turn signals for bicycles, it is better to use simple flashlights with one or two flashing modes, otherwise you can get tangled in the wires. It is advisable to insert a regular rear light between them so that the bulbs do not visually merge into one. Next, you just need to find the power wire and pull it out. This is what we will connect to the cable in the future.

Power wires for LEDs on flasher

USB is convenient because its internal wires can be clearly divided into the right and left bulbs. We cut the cable on one side and connect it to the leading wiring of the flashlights. All wires must first be cleaned.

At the other end of the wiring, the corresponding sides are connected to toggle switches. Lanterns are fixed to a surface - a board, plastic plate or frame. All this is attached to the rear of the bike, the toggle switches are mounted on the handlebars. To secure the wires and toggle switches you will need clamps.

When hanging the wire on the frame, it is necessary to allow a little slack so that it does not accidentally break when turning the steering wheel. Reliable fastening of the cable with lamp wiring and toggle switches will be ensured by soldering. However, do-it-yourself turn signals will still have low structural strength and may also be damaged when replacing batteries.

It will be rational to install purchased or “homemade” turn signals on a bicycle when moving on the roads at night. Drivers driving behind will be warned in advance of their intentions, which will not only avoid an emergency, but will also increase respect for the cyclist.

Rear Bicycle Light with Turn Signals - Wireless turn signal signaling system for turn signals. A bicycle light ensures safety when riding a bicycle in the general flow of traffic. A safe way for cyclists to warn others behind you when you are about to make a turn is essential. Visibility while driving is guaranteed! New model parking light for a bicycle. Bicycle light with wireless remote control Waterproof Suitable for all bicycles and electric bicycles
Peculiarities:
The Rear Bike Light with Turn Signals is a wireless bicycle turn signal system for everyday use. It consists of waterproof: a main unit with flashing arrows and a remote control. The flashing arrows are made from energy-efficient LEDs. The rear bike light with turn signals is designed in such a way that the main unit can be easily mounted and removed under the seat on the seatpost. The bike light has a large LED matrix display that will show the change in signal according to the action made using the remote control.
The rear bike light is shockproof and water-repellent, and works properly in high humidity. Bike light with turn signals is powered by built-in 650 mAh lithium ion battery, it operates up to 10 hours in constant-on mode, after fully charged. Also, the rear brake light for a bicycle has a controller, which is attached to the handlebars of the bicycle, in convenient location and runs on one CR2032 battery (included), can last up to 6 months. The bicycle headlight is equipped with diodes indicating the battery charge level.
The bicycle light is also equipped with two laser beams, which provide additional security and visibility on the road. It is easily mounted on the bike post and can be easily removed if you need to recharge. Remote for controlling a bicycle light, it can also be easily attached using ties to the handlebars of a bicycle

characteristics:
black color
material: ABS plastic
number of LEDs: 64 LEDs
power: 3.7V 650mAh Lithium battery
The controller runs on CR2032 (included)
controller diameter: 5.5cm
lantern size: 7.5*5.7 cm

Equipment:
1 Lantern
2 Bracket
1 USB cable
1 Remote control
2 Nylon zip ties
There are other bicycle lights Hoy-13v bicycle products and accessories for bikes
If you are interested in this offer, call, write or leave your phone number and I will call you back. If you couldn’t get through by phone, then write, we will answer everyone. You can leave your question in the form feedback here on the website or by email. Contact by phone, Whatsapp, Viber, e-mail.
Pickup - by agreement Moscow: 7 min. Walking distance from metro station Sviblovo
In Moscow there is delivery by courier, delivery to pick-up and delivery points.
Delivery in Russia: CDEK, Boxberry, Russian Post
Moscow and Moscow Region - Pickup or delivery, shipping to regions