Paint name by VIN code. Search and determine car paint color by VIN code

In its original form it is almost impossible. To do this, you will have to lock the machine indoors and not even touch it. But here, too, time will do its work. During normal everyday use, cars encounter various factors that can damage the paint layer. These are scratches, careless driving, chips from debris and stones on the road. Even fruits and berries falling onto a car standing under a tree, due to the acid they contain, can gradually... When small damage appears, you can ignore it. And there are some defects that are simply impossible not to notice. The coating needs to be restored.

But in practice, it turns out that choosing the perfect paint is not as easy as it might seem at first glance. Colors that are identical in appearance when applied can. As a result, you can immediately see that the car has been painted. Owners have to look for ways to solve this problem. And here many are interested in how you can find out the paint color of a car by its VIN code. A fairly effective method that allows you to find exactly the shade that the car was painted with at the factory. Not everyone knows about this method, although it is considered the most correct.

Why is this necessary?

A responsible car owner is always interested in maintaining the ideal appearance his vehicle. This also applies to him technical condition. When a car gets into unpleasant situations such as accidents, traffic accidents, or runs into various obstacles, the appearance of the car deteriorates significantly. Even high-quality bodywork will not allow you to preserve the paint layer in the same form that it had before the accident. Needs repainting. Also, the paint can simply fade, wear off, and scratches and chips periodically appear on the body. All this forces the owner to paint over the defects. Sometimes only a small area of ​​the body is processed. In other, more serious situations, it is necessary to carry out a full cycle of repainting the vehicle.

There's only one problem. It lies in how to accurately select the paint. Yes, if this is a complete repainting, no one bothers you to change the shade or even color. But when partially restoring the paint layer, a shade that exactly matches the rest of the body is required. If you try to select paint by eye, about 90% of such attempts will lead to an error. It is important to understand that there can be a lot of identical colors in appearance. But many of them give slightly different shades after drying. As a result, in contrast with others, this becomes very noticeable.

Some do things differently. Often, car owners remove an element of the car, mainly the gas tank cap, and go to the store, comparing it with the paints on offer. The method is not the worst, but even here there is a high probability of making a mistake when choosing. You can also refer to the technical documentation of the vehicle. Although often it only indicates a specific color without shades or any special codes. Still, we must not forget that one color has several dozen shades. And depending on the paint manufacturer, its texture may differ. You shouldn’t give up and buy the first can you come across. There is a great way to check and reliably find out the color number of a car using the VIN code.

VIN code search

Before you can find out the color code for the right paint for your car, you'll need to find the VIN itself. It is applied to special nameplates or plates, which must be located on the vehicle. Latin letters and numerical designations are used to fill out the nameplate. A lot here depends on the specific car manufacturer and even on the model and year of its manufacture. There are no strictly regulated requirements regarding the location in which all car companies are required to mount signs. Therefore, everyone chooses the area that is most convenient for them. Therefore, VIN codes are found on:

• pillars on the driver's door side;
• areas under car windshields;
• right side of the engine compartment;
• floor under passenger seats;
• luggage compartment lid;
• trunk bottom;
• inner parts of the wings.

Information is applied to the VIN code plate using embossing or laser engraving. The second option is used for more modern cars, allowing you to create clear and hard to erase inscriptions on the nameplate. The number itself can be located in one or two rows.

Although each manufacturer determines the location of the code themselves, they cannot be hidden from the car owners themselves. Therefore, they are all within easy reach. In rare cases, something has to be dismantled. Unless the driver has to move the carpet or lift the engine compartment lid. All nameplates provided for the vehicle must be specified in the technical documentation for the vehicle. The manufacturer is obliged to indicate exactly where the plates with the VIN code are located.

Search for paint color by VIN on foreign cars

The domestic automaker has provided enough simple diagram placement of nameplates, which does not cause any special problems for drivers when searching for a VIN code. With foreign cars everything is a little different. Finding out their identification numbers is sometimes much more difficult. For owners, the search turns into a real quest. Moreover, these excavations of the internal and external surfaces of the car do not always end successfully. If you are interested in how you can find out the color of the paint used on a car using the VIN code, you need to start simple. Each paint has its own number. This is a kind of code that allows you to find out the characteristics of the paint and varnish material and the pigments used in its composition.

The main problem with foreign cars is that not everyone reliably knows how to correctly determine the color and specific shade of a car’s paint using the VIN. And this is due to the different location of nameplates on foreign-made cars. Let's give some illustrative examples.

Majority Japanese cars They use a separate line on nameplates called Color, that is, color. Here a unique code is indicated by which you can find the paint. But it also happens that the inscription is missing. Then it’s worth trying to use special programs from the official car manufacturer. Although they do not always provide information about all models. If for some reason you were unable to find the code in the VIN code, or you doubt your decision, then contact representatives of the auto company that manufactured your car. This can be done over the phone or by sending an email. But it is better to call, because this way you can count on a faster response.

The car owner's task will be to dictate the VIN code. The sign is not difficult to find, and therefore no problems will arise here. Specialists will decipher the VIN and will soon give you an accurate answer. This is a guarantee that you will buy new paint that perfectly matches the color of your body for restoration work. Automakers use the same colors to produce different models of cars.

The composition of the paint also changes over the years. A blue car from 2008 is unlikely to be painted the same color with similar pigments as a blue car from 2018. Therefore, it is best to determine the shade using a special enamel code. Knowing exactly how you can find out the paint color of your car with only a VIN code, you will quickly solve all problems. This is an extremely effective and efficient method, which for some reason many people forget about.

We've sorted out the foreign cars. Now it’s worth figuring out how to correctly find out the color of a car by VIN code, if we are talking about the domestic automobile industry.

Color search for domestic cars

Owners of cars produced by Russian automakers do not have any special problems when searching for the enamel code. First you need to find the sign. Everything here is extremely simple, since the area under the hood or the luggage compartment lid is used to place the nameplates. It is also important to remember that domestic vehicles require the production of special labels on which the color number is written. This label is called Form 3347. You can usually find it in several places:

• inside the glove compartment of a car;
• on the luggage compartment lid;
• under the spare tire;
• in the niche near the spare wheel;
• under the car's brake lights.

If you manage to find this special label, it is recommended that you copy down the number. Moreover, many car owners put information on the inside of the gas tank cap. This will prevent you from losing or damaging the inscription. When buying a used car, it is not always possible to find the label. But since many people know about this trick, look in the gas tank. It is possible that the previous owner has already copied the code from the label onto this element of the car. The absence of a label and the information written on it on the gas tank cap also cannot be considered a serious problem. Just look at the warranty card, which also states required code automotive enamel. There are very good options on how to find out the exact color of a car for free by VIN code.

Please note that it is not always possible to purchase a ready-made can of paint that will completely match the enamel shade of your body. Here it is better to contact an experienced and trusted colorist. This is the name given to specialists involved in the production of paints. Colorists usually only need the code. Using it, he can easily recreate the composition that was used to cover the body of your particular vehicle. But sometimes additional information is required in the form of the car model name and year of manufacture. Based on this information, the colorist can easily find a list of enamels that were used to coat cars of this model in a certain year of production. All information is publicly available, and therefore there is no need to carry out any complex search activities.

It is a mistake to believe that the VIN code serves solely to identify the car, its manufacturer, year of manufacture and other technical information. It contains a large amount of extremely useful data, including the number of the enamel used when painting the machine. Do not forget about the need to strictly adhere to all coloring rules. If the car requires serious repairs, and the paint layer is restored completely, or over a large area, it is better to contact good specialists who have special boxes at their disposal for these purposes. Their colorist will help with the production of paint, and the dyeing process itself will be carried out in the conditions that best meet all requirements.

If the defects are small, you can easily handle the task of restoring the paintwork yourself. To do this, you need to prepare an area of ​​the body for painting, remove all dirt, remaining peeling paint, and degrease the surface. We must not forget about the likelihood of corrosion if the metal was damaged or even slightly deformed upon impact. Here it is better to immediately do anti-corrosion treatment, apply primer and then use the right paint.

Even when painting a small part of the body, the car must dry completely. Therefore, it is not recommended to drive it out of the garage for 2–3 days after completion of the work. Also avoid washing with running water. high pressure. By following all these rules, you will be able to maintain all the protective properties of the new enamel, and you will also be able to restore the paint layer so that the damaged area is no different from the color of the rest of the body elements.

He probably doesn’t think about how much the painting service costs. But in fact, this is important. Often, repainting a car is equivalent to paying half of its cost again. To save money, craftsmen offer to restore a separate part of the car that has been worn out. Due to the large number of colors and shades that are currently used in the automotive industry, a standard number palette has been created. In most cases, the paint number for a car can be found here.

It is worth considering that each has its own palette. Very often colors and shades domestic cars do not match Western standards. Therefore, if you decide to paint over a scratch on your car yourself, you must first learn to determine the number of the paint with which it was painted.

Believe me, this knowledge will not harm you, even if your car currently has no problems with the coating. No one ever knows where he might crush or catch “crushed stone.” There are many reasons why the top layer can be damaged, and all of them depend only on chance.

How to determine the color number

There are several different ways to identify paint by numbers:

1. When y official dealer In a serious car dealership you will find the paint number on the car itself. Most often, a tag with its name and corresponding number is attached to inside trunk or to the inside of the door. Make sure that this color is also written down on the warranty card and registration certificate. If the data differs, then this method of determining the paint number is not suitable for you.
2. Most car manufacturers indicate on their websites the palette of shades that a car can be painted in at a certain time of production. Thus, having found the month and year of manufacture of your car, you can find out by comparing with standard samples presented on the official website. In addition, usually large companies worry about their customers and post a full range of colors on their interactive page. It is standard for almost everyone. The exception is companies such as, for example, Chevrolet. Here they use codes that include three Latin letters. Their correspondence color palette also published on the company's official website.
3. Despite all of the above, you doubt the correctness of your choice, justifying your doubts by the possibility of inaccurate color reproduction by the monitor. Then you should contact a car service. Professionals will be able to determine the paint number of almost any car. To do this, they will need to bring the gas tank hatch. Large car repair shops usually have a special catalog in which hundreds of different shades are numbered.

Remember that if the car was left for a long time, it could change color, or rather its saturation. Sometimes experts recommend painting over not only the scratch itself, but also the entire damaged part (door, trunk, fender). There are also cases when the paint color number is determined correctly, but the painted part is still very different from the color of the entire car. Unfortunately, in this case it is necessary to repaint the entire car.

In the video - how to find out the color of a car:

How to find out the VIN number

Another way to find out the color of a car is. The VIN code is a seventeen-digit identification number that encrypts a large amount of information about the car. Each number in it has its own meaning, for example: body type, engine, place of assembly, model number.

This code is indicated on a sticker that is located under the hood of the car near the engine. Sometimes it is also placed at the bottom of the door pillar. This number must be written down and taken to the auto repair shop. The paint is determined by the VIN code by a special program on the computer into which it is entered.

In addition, you can determine the shade by the VIN code from an official dealer of cars of this brand. By providing the number, after some time you will receive all the necessary information regarding your car and its color. Dealers can be contacted by phone, email or in person by visiting the auto center office. The tone specified by the manufacturer can be safely passed on to the car service technicians.

As you can see, when repairing a car you will definitely need to know the shade and paint number. Determining the color by eye means dooming your car to repainting in advance. This, firstly, will hit your wallet, and, secondly, repairs will take additional time.

The body colors of VAZ cars and color numbers given in the table below will help you find out the color of the car and the paint number of the car. It is applicable to the following models of domestic VAZ cars: 1111 Oka, 2101-2121, 2131 (Niva) 4x4, Chevrolet Niva, LADA Priora(Priora), LADA Kalina (Kalina), LADA Kalina Sport, LADA 110, LADA 112 Coupe, LADA Samara, LADA 2105, LADA 2107, LADA 4x4, LADA Granta, Volga, IZH, GAZ cars

How to find out the color of a VAZ car

Label with body color number domestic cars You can look on the trunk lid, in the glove compartment, in the spare wheel well near or under the spare wheel, under the brake light on the spoiler. This simple piece of paper is called Form 3347. It can be difficult to find, easy to lose, and easy to forget. Therefore, if it is found, champions recommend writing down the number and name of the paint with a marker on the inside of the gas tank flap. If you have a used car, check to see if someone has already done this.

Please also note that the color code is also written in warranty card.

What else can you do to find out “what is my Lada painted?” An alternative is to contact the dealer from whom you bought the car, which works naturally only if the dealer is a completely official organization.

If you do not have any documentary evidence indicating the color your car is painted, you can try to establish this using the LADA painting plan at the factory. To do this you need to know the exact date(year, month, day +/-) of the release of your car and it should not be younger than 2005. If you know the date, write to us and we will try to find out the color of the car this way.

However, the surest way to determine color is to refer to colorist. And you can choose the right shade if you show the colorist the gas tank flap, with the help of which a specialist using special equipment will be able to make paint for you exactly in the color and in the volume you need - tint, spray can or can. Actually, all this can be done in our laboratories for computer paint selection.

Color fan 2019

Online fan of flowers, in the form reference information, will help you choose colors for painting your car, for example, if you decide to paint it a different color. The table shows the car colors, car color name and paint codes from the VIKA color fan.

Please note that the table also shows paint colors for foreign cars that are produced here and in neighboring countries. You can see the original colors of foreign-made cars at the link - car paint colors for foreign cars

The table also shows the release forms, brands and prices for enamels of the colors presented in the fan. Usually you can buy all colors from us, if one is not in stock, then we can bring the paint you need to order as quickly as possible.

* Of course, the color does not exactly match the original, due to the color rendering characteristics of your device’s monitor. If you are the owner of a car of any color from the table, we and other car enthusiasts will be grateful to you for providing a photo by email: [email protected] . Thank you!

A large number of road transport, uneven road surfaces, carelessness of the driver and other reasons may lead to the need to paint a car or a separate element.

Dear readers! The article talks about typical ways to resolve legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and 7 days a week.

It's fast and FOR FREE!

To achieve maximum similarity to the color of a used car, before painting it is necessary to select the color of the car enamel.

In what ways can you select a paint shade and is it possible to determine the color yourself, knowing the VIN code of the vehicle, read on.

In what cases is it necessary

Determining the color of a car's paintwork requires:

• if necessary, painting of individual body elements restored after;
• in the presence of chips, cracks and other types of damage to the body. Timely painting protects the vehicle body from premature corrosion and other negative consequences;
• if necessary complete replacement damaged body elements;
• if it is necessary to completely repaint the car without submitting the relevant registration documents.

Determination methods

You can select the color of car enamel yourself or with the assistance of qualified specialists.

The second selection method will be more reliable, since special equipment helps to select a shade not only set by the car manufacturer, but also acquired as a result of natural wear and tear of the paintwork.

So, choosing the color of auto enamel can be done in one of the following ways:

• by individual VIN number, which is assigned to the vehicle by the manufacturer;
• by contacting a repair organization that also deals with paint and varnish work;
• from the car manufacturer (on the website or by personal contact by mail or online);
• through vehicle research.

Let's look at each method in more detail.

By VIN code

The individual vehicle number assigned by the manufacturer (VIN number) consists of 17 characters.

The letters and numbers of the code are arranged in a sequence determined by international and corporate standards.

The character set allows:

• determine the manufacturer and year of manufacture of the vehicle;
• find out the make and model of transport;
• identify the main specifications auto.

By VIN number you can also get information:

• about the presence/absence of administrative sanctions imposed on the car;
• about the presence/absence of restrictions on registration actions;
• about the history of the car (the number and type of previous car owners and the time of change of owners);
• about the vehicle being wanted;
• about the participation of the car in traffic accidents and so on.

In addition, the VIN number makes it possible to select spare parts for the car, including finding out the color of the car enamel applied by the manufacturer.

To determine the color and other characteristics of a car, you must first find out the unique vehicle number directly.

You can do this in several ways:

• by car. Plate with identification number on passenger cars located on windshield and the driver's door pillar, on truck– on the driver’s front door pillar and on the beam under the front wheel, on a motorcycle (scooter) – on the steering column pipe;

Depending on the vehicle model, information plates with VIN number can be located in other places, for example, under the hood of a car, in the trunk, under the seat, and so on. You can obtain more information about the location of the plates from the manufacturer or an official representative of the manufacturer.

• in vehicle documents. The identification number is indicated in and. Additionally, the vehicle code can be found from;

  

• online, knowing the state register sign vehicle. Information can be obtained on the RSA website by filling out the appropriate fields of the form provided;
• at the traffic police (in person). Information government agencies issued upon prior request and only to a certain circle of persons, which includes vehicle owners, legal representatives of car owners, heirs, persons injured as a result of a road accident, representatives of other government agencies, and so on.

A request for a VIN code must be made in writing after submitting the appropriate package of documents. The response can be received in person, by letter, by mail or online to the email address specified in the application.

Contacting a car repair shop

The most optimal way to select the paint color for a car is to contact a car repair shop. The company's specialists select the colors of automotive enamel using special equipment.

To do this, in addition to the documents for the car, which indicate the individual number, you will also need a certain part of the body (gas tank cap, trunk element, etc.), against which the currently available tone is checked.



The selection process does not take much time. On average, it takes from 15 minutes to 1 – 2 hours.

This operation is paid additionally in accordance with the current tariff rates of the repair shop and the time spent on selecting auto enamel.

From the automaker

You can choose the desired shade of car paint by contacting the manufacturer for help.

You can submit a request for color selection on the manufacturer’s website online or by sending a letter by mail (the processing time for the request and waiting for a response increases).

Your written request must include:

• car make and model;
• year of manufacture of the vehicle;
• equipment or VIN number;
• contact details (name, phone number, email address).

View on TS

Another way to obtain information about the paint coating applied to a car is to simply compare the body with the color scheme of the enamels.



This method allows you to fairly accurately determine the color of the body obtained after using the car, and practically does not help determine the color of the factory paint.

The color of the car is also indicated in the title and vehicle registration certificate, as it is one of the most common distinctive features of vehicles.



The procedure for determining the paint number by the vehicle's VIN number

To determine color by VIN code motor vehicle Can:

• contact specialists who will decipher the serial number;
• carry out the decryption work yourself, for example, using special online programs that allow you to obtain the necessary data in the shortest possible time and without additional monetary costs.

The VIN code can be obtained from various Internet resources, for example, on the autoDNA website.

To do this you need:

• In a special form located on the website, enter the identifier and click “Check VIN”. You must enter data extremely carefully, since an error in even one character can lead to distortion of the information received;

  

• wait for the result of the check, which takes no more than 1 minute, and find out the color of the vehicle.



It is worth noting that the color corresponding to the vehicle's VIN number and the color obtained after using the vehicle for a certain period of time are slightly different from each other.

Therefore, for a more accurate selection of auto enamel, it is recommended to use other methods.



In the example shown, a 2000 Ford car is painted Champagne silver, which corresponds to the number TN-114.

How to view online on the manufacturer's website

You can get information about paint color online on the vehicle manufacturer's website. To do this, a written request is sent to the manufacturer online (via the “Ask a question” form).

To obtain reliable information in the request form, indicate (using the example of the manufacturer AvtoVAZ):

• subject of the request (required for the fastest possible processing of information by company specialists). To get an answer about the tone of the car enamel, you must select the topic “Spare parts”;
• Full name of the person applying;
• contact information (phone, email);
• region of residence of the car owner;
• vehicle model;
• VIN number of the car;
• the essence of the issue (for example, help you choose the color of the paintwork).

Each vehicle is assigned a unique VIN number. This code allows you to recognize the number of paintwork materials used at the factory. It's worth figuring out how to code.

VIN numbers are often located on door surfaces and under the hood. On many cars it can be seen in the trunk under the spare tire.



In foreign cars

On foreign-made cars, the location of the VIN code is different:

• On Hyundai Solaris it is located on the driver's door. The code may be located near power unit. Having deciphered the wines, you can determine the desired shade from the catalogue;
• You can find out the paint colors on a Ford Focus by looking under the hood - the VIN is located near the engine. In some models, the manufacturer placed it on the driver's door;
• On the Nissan Almera, the paint markings are located under the hood. You should look for them near the windshield;
• On the Chevrolet Lacetti, the paint shade code is located near the radiator near the power unit. It can also be found near the engine or windshield;
• Car manufacturer Mazda places numbers on the pillars or near the engine. Sometimes the identification number is located on the passenger door;
• In most Toyota cars, the color of the body enamel is indicated on the internal reinforcements of the front doors;
• In Peugeot, the plate is attached to the front pillars.

In some cars vin placed in the doorway.



For domestic cars

By car Russian production The nameplate with the VIN is placed on the trunk lid. Another popular place is the engine compartment. This is where the color code and markings on AvtoVAZ models are located.

In some domestic models, colors are designated by names, for example, “white cloud”. In such cases, the car paint number should be looked for in the catalog. However, it is not enough to just determine the LMB code.

The enamel may be exclusive - in such cases its designation is only available in unknown catalogues. If the paint manufacturer is not indicated, it will not be possible to accurately determine the paint number. In addition to determining the numbers, you should find matches for the paint and varnish material in catalogs.

Selecting paint for older models is difficult because the information you are looking for is not indicated on the VIN. There is only basic information there. The paint color on many cars began to be indicated in the form of a code only in 2013. In other cases, the required shade can only be selected using spectral analysis.



Decoding

The paint shade code is selected based on several components of the VIN code, indicated by the Latin alphabet. Each of them has its own decoding:

1. WMI. The first two letters determine the place of manufacture of the car. For example, for cars of European origin they are in the S-Z range. The third character is a number indicating the manufacturer.
2. VDS. These letters indicate vehicle identification. They indicate the model, vehicle weight, body type, etc.
3. VIS. The symbols of this designation contain information about the year of manufacture of the machine and its serial number.

When determining the color by the VIN code, it is important to know all the data about the car. They will help you find the paint number in the manufacturer’s catalog or on one of the specialized sites.



How to find out a car's paint number by VIN

You can select the paint code by VIN code yourself or using the convenient service avtobot.net (you can check without registration). The second method is more convenient.

When choosing paint yourself, you must:

1. Go to the car manufacturer's website.
2. Using the data obtained from the identification number, find your model.
3. Find out the exact designation of paintwork materials.
4. Go to a specialized service and determine the paint using the catalog provided.

For online selection paints on avtobot.net, just after entering the site, enter the VIN in the specified field and click “Find”. All information about the car will be displayed at the bottom, including the LMB designation. Having found the desired designation, you can order a pencil (enamel) for painting chips in any online store with delivery to the desired location. It is easy to purchase a specific paint in a specialized auto store by voicing the found number.



The technical passport also contains all the information. However, the manufacturer does not always indicate a numerical or letter code - often you can only find the name of the color.