Choosing oil for the Kia Rio engine. What kind of oil to fill into a Kia Rio engine? What kind of oil does the Kia Rio manufacturer fill in?

Right choice motor oil will prevent wear and ensure normal operation car engine. In this article we will tell you what kind of oil to pour into the Kia Rio engine. In addition, you will learn how to determine the frequency of replacement of lubricating fluid and oil filter and how to perform these works yourself.

[Hide]

About replacement frequency

The operating instructions, relevant for cars produced in 2010, 2011, 2012, 2013, 2014, 2015, 2016, recommend changing the oil every 15 thousand kilometers. However, in practice, this recommendation is only suitable for operating the machine in optimal conditions, which is not always feasible in Russia and the CIS countries.

City streets are overloaded, cars move at low speeds, and stand idle in traffic jams. In such conditions, motors operate for a long time at idle speed, and this does not affect the speedometer readings at all. Also, the replacement period is significantly affected by the quality of fuel at gas stations, which does not always meet the required parameters. Therefore, the optimal vehicle mileage between replacements is motor lubricant the mileage will be approximately 10 thousand km, and when used in difficult conditions it will be reduced to 7–8 thousand km.

Some experts advise using the readings when determining when to change the lubricant on-board computer. With its help, you can easily find out the average speed of the car. If this figure is more than 50 km/h, you can safely operate the power unit up to a mileage of 15 thousand km. If it is in the area of ​​30 km/h, the mileage is reduced to 10 thousand km.

Watch a video about changing the oil from user Mikhail Knyazev.

Possible causes of oil consumption

This problem occurs even in completely new cars, but most often this “disease” accompanies cars with significant mileage.

Increased oil consumption can be caused by:

• the presence of leaks in the power unit;
• wear of the cylinder, pistons, rings;
• increased gap between guide bushings and valve stems;

Typical causes of such problems:

• improper operation of the machine;
• movement in dusty conditions;
• work for a long time at idle speed;
• frequent movement at high speeds.

Which oil is better to choose

The service life of any car engine depends on the quality of the lubricant used. It can be difficult to make the right choice on your own, since trading platforms are filled with a large number of motor oils from different manufacturers and of different quality. Review the car manufacturer's recommendations, listen to the advice of experts, and only then decide what kind of oil to pour into the Kia Rio engine.

Engine oil for Kia Rio QUARTZ lubricant HELIX ULTRA oil HELIX oil

Motor lubricants are distinguished by season of use:

• winter lubricants;
• summer oils;
• all-season motor oils.

These products are based on the following materials:

• mineral oils;
• semi-synthetic;
• synthetic.

The manufacturer recommends using synthetic-based oils for Kia Rio. Various additives are added to such a product, which improve wettability, have anti-corrosion properties, and increase wear resistance. Manufacturer's recommended viscosity motor fluid- 5W-20, 5W-30. All-season oils with a viscosity of 10W-40 have also become very popular.

If the owner decides to change the lubricant himself, he should take into account the existing features power units these cars.

• Shell Helix Ultra;
• Total Quartz;
• Divinol;
• ZIC XQ LS;

From the list presented, the most suitable option would be Shell Helix Ultra. It has a complete list of necessary additives that ensure a long period of operation of the machine. Total Quartz also has a good set of additives. Lowest consumption has Divinol lubricant. ZIC XQ LS fluid can also be safely used for this machine. In addition to the listed lubricants, they use products from Mobile, Castrol, and some others.

Selecting a filter

Oil filter

Replacing motor lubricant in Kia car Rio implies a mandatory replacement of the oil filter. For certain engine modifications, oil filters with different catalog numbers are used. For a power unit with an engine capacity of 1.4 liters, the filter has catalog number 2630002503, and if the volume is 1.6 liters, the number is already 2630035504. Its cost can start from 200 rubles, it depends on the manufacturer of the spare part and the markup of the retail chain.

Level control and required volume

The amount of engine lubricant depends on the type of engine and its size.

Before checking the oil level, you must turn off the engine after the trip and wait 5-10 minutes until the fluid drains into the crankcase.

Instructions for measuring the level and adding lubricant:

1. Place the machine on a flat, horizontal surface.
2. The oil dipstick is located in the front part of the engine compartment, the filler plug is on the right side of the cylinder head cover.
3. Take out the level meter, wipe it with a rag and put it back in place.
4. Remove the dipstick again. The lubricant level should be between the Max and Min marks.
5. To add oil, turn the oil filler cap counterclockwise and remove it.
6. Oil must be poured into the engine, monitoring its level using the dipstick. Before removing the level gauge, wait a couple of minutes for the oil to drain into the crankcase.

Motor lubricant must be of the same brand, viscosity and quality class as that previously filled.

Changing engine oil yourself

There are two ways to replace engine lubricant on a Kia Rio: vacuum pumping out the used fluid or the standard method of draining the old oil. For the first case, you will need special equipment that will pump out the lubricant through the hole for the dipstick. Such equipment is not available in all service stations, and in personal garages it is not available due to its high cost.

It is much cheaper to replace it using the standard method, in which the used lubricant is drained through the drain hole. This method is considered more reliable, since most of the deposits and dirt collect in the lower part of the pan, from where they can be completely removed.

Necessary tools and consumables

In addition to fresh oil, you will need the following:

• oil filter;
• sealing gasket of the drain plug. Catalog number 21513-23001;
• empty containers of the required volume for collecting used oil;
• a rag to remove spilled lubricant;
• wrench on "17" or a head of a similar size.

In some cases it may be necessary, 3 liters will be enough.

Algorithm of actions

Engine oil is drained from the engine only when it is warm. This can be done at the end of the trip or by letting the engine run for about 10 minutes.

Important! When draining oil on a hot engine, be careful not to get burned.

The procedure will be something like this:

1. The car is installed on an overpass, a lift or above an inspection hole. After this, you should place stops under the wheels.
2. The crankcase protection prevents the drainage of the lubricant; it must be removed.
3. After this, the waste liquid is poured into an empty container. Before doing this, carefully unscrew the drain plug. Remove the oil filler cap first, this will speed up the flow of lubricant.
4. Now remove the oil filter and install a new spare part.
5. The drain plug is cleaned of foreign impurities, a new gasket is installed on it, and then screwed into place.
6. Pour the required amount of motor lubricant into the engine, how much to pour was reported earlier. The volume of the poured mixture is controlled using a measuring probe. The lubricant level should be between the Min and Max marks.

This operation does not cause any particular difficulties for owners. It can be easily done in the garage with your own hands.

Pouring engine oil into the engine

Replacing the filter

Removing an old oil filter may cause some difficulties. On a warm engine it has high temperature, so you should work with gloves. It is not always possible to unscrew it by hand; you can use various devices to dismantle it. Some drivers pierce the filter housing with a thin screwdriver or punch, and then use this tool as a lever with which to twist the filter out of its place.

Before installing a new filter, fill it with fresh oil. It will be enough to fill in 150–200 grams of lubricant and lightly coat its O-ring with oil. After this, install the filter element in its place. To seal the filter, just tighten it by hand; in the future, this will make it easier to dismantle the old product.

KIA RIO FAQ user shows on video how to change the oil and filter

Consequences of untimely replacement

If you do not follow the oil change schedule, accelerated wear of engine parts occurs. Modern oils have additives that improve their properties. When working at high temperatures, these additives gradually burn out and the lubricant’s performance deteriorates. As a result, there may be oil starvation which can cause the crankshaft liners to rotate.

Turbocharger compressor parts suffer greatly from exhausted oil. Contaminated lubricant clogs the oil supply channels, which can cause the shaft of this unit or other mechanisms to jam. Old oil fluid does not remove temperature well from overheated engine parts, which also has a bad effect on its condition.

Change the engine oil on your car KIA Rio possible at the station Maintenance(STO) or independently. This procedure is described in some detail in the car manual, and is not particularly difficult. Considering the prices at service stations, it is best to change the oil yourself. This will significantly save the family budget.

Usually, Do-it-yourself engine oil change for Kia Rio 2011–2017, is no different from the procedure carried out at the service station. The recommended interval for changing engine oil for the Kia Rio is 15,000 km. But in practice, it is better to replace it after 7,000–10,000 km. This is not surprising if you take into account the condition of the roads and the urban pace of the car with frequent stops. All these circumstances lead to a rapid deterioration in the quality of motor oil. First of all, the lubricating and cleaning properties of the oil deteriorate, which greatly increases engine wear and reduces its service life. At the same time as changing the engine oil, do not forget to replace the oil filter. The oil and filter are always changed at the same time on any car.

In practice, changing the oil on a KIA Rio yourself can be done in two ways:

— Vacuum oil pumping. Vacuum pumping is usually done through the hole for the engine oil level dipstick. This method is good because there is no need for a lift or overpass. The main disadvantage is the need to use special equipment, which is not available in every service station.

— Drain from the car pan. The second, traditional and decades-tested method is more reliable, since all waste accumulates in the engine sump. Vacuum pumping is simply not capable of pumping out all the used oil from the sump.

To change the oil we will need:

1. Oil filter - 26300-35503.
2. Engine oil is usually official dealer fill in a barrel of SHELL HELIX ULTRA 5w-30, it is recommended by the KIA plant. But you can also buy it in a regular four-liter canister. When choosing an oil, it is worth considering what is indicated in the warranty: oil 5W-30 class SN or SM (SN is better, since it is a more modern standard).
3. Engine oil pan drain plug gasket - 21513-23001
4. Key "17" for twisting the drain plug.
5. Flushing oil 3 liters.

Change of oil.

The replacement process is carried out on a warm engine; heated oil is more fluid and easily drains from the lubrication system.

— After warming up the engine for ten minutes, you need to go to the inspection hole. If necessary, this is not difficult to do; just unscrew a few mounting bolts. will interfere with us when replacing the oil filter. With a certain level of skill, you can not remove the protection completely, but only unscrew the two bolts securing it to the subframe.

— Then you need to drain the used oil from the crankcase into a container specially prepared for this purpose. The crankcase plug must be unscrewed very carefully, since the oil is very hot, it is better to use gloves and goggles.

— After the oil has drained, the plug can be taken in two ways, replaced with or without flushing oil:

1. With flushing oil. Tighten the drain plug after replacing the drain plug gasket, and fill in about 3 liters of flushing oil. Let the engine run for about 10 minutes and drain the oil again. (There is a way to remove the remaining flushing oil by repeating the flushing procedure only using 2-2.5 liters of oil, which you will fill during replacement.).
2. No flushing oil. With this option, we remove the remaining used oil from the crankcase; for this we use a syringe with a curved needle.

The question of using flushing oil arises in cases where it is not known which oil was filled in previously or when a changeover to another type of oil is being made. In other cases, you can do without using it. Modern motor oils already have the necessary washing and cleaning properties to clean the engine lubrication system.

— Now you can twist the oil filter to replace it. As a rule, this can be done by hand without using a special tool. Before installing a new filter, you should pour 150-200 ml of oil into it. Then carefully screw on the new oil filter by hand. There is enough hand strength to tighten the filter, this will allow you to easily twist it by hand the next time you replace it.

If you can’t remove the filter by hand, it doesn’t matter if you have a special tool or the old-fashioned method. It’s simple, take a thicker screwdriver and a hammer, pierce the filter through with a screwdriver and use this lever to unscrew it.

— After completing all the procedures, use a key set to “17” to tighten the drain plug, having first replaced the gasket.

Owners of Kia Rio cars 2011-2015. We have long been convinced of the reliability of the power units with which the manufacturer kindly equips these practical Korean models. But let’s note a well-known fact that without proper care, any engine is at risk of breakdowns, and its former agility will only be in the pleasant memories of the careless Kia Rio owner.

The most important point in servicing the Kia Rio power unit is maintaining regular oil changes according to the scheduled intervals. It is recommended to use the indicated procedure more often than the manufacturer states. Many people are interested in what kind of oil to use?

No one will dare to dispute the fact of the need and importance of timely replacement of lubricant in the engine. Also, this fair judgment and practical Kia model Rio 2011-2015 During operation, an increased and responsible load is placed on the engine, which requires the presence of only high-quality oil in its depths.

Among the main parameters characterizing a lubricant is its viscosity, which makes it possible to determine the degree of fluidity. Only by using a correctly selected lubricant can you provide your car’s engine with guaranteed protection against premature wear.
The engines with which the Kia Rio is equipped require the use of oils whose viscosity implies a value of “5” units, for example, “5W-30” or “5W-40”. We should not forget about the oil filter, which must be replaced at the same time as the oil, regardless of its condition.

How to choose oil?

What kind of oil should I put in the engine? Before traveling to the store to purchase lubricant, you should carefully familiarize yourself with the parameters of the liquid and determine its applicability to engines. KIA Rio the indicated years of manufacture. Taking into account the identified aspects, we attach several current options, which we will further describe in detail.

These are the following brands of liquid:

• "Shell Helix Ultra";
• "Total Quartz";
• "Divinol";
• "ZIC XQ LS".

The first of the indicated options is unconditionally suitable, if we take into account the ratio of the cost of the product to its quality aspects. During the analysis, it was revealed that the liquid is equipped with a full range of necessary substances and additives, which is justifiably suitable for KIA Rio engines. In addition, this brand of oil is capable of not losing its condition even over a long period of use in the engine. And this is a very significant plus.

“Total Quartz” is also capable of boasting excellent and balanced characteristics that ensure the safety of engine components. Price this option acceptable, and the liquid fulfills it with 100 percent results. As with the previous case, this lubricant is able to maintain its performance qualities throughout an impressive period (mileage) of its use.

Divinol lubricating fluid is not characterized by high consumption. Despite the low popularity of the brand, this circumstance does not in any way affect the quality aspects of this product. This option is an excellent choice and will reliably protect the KIA Rio engine from intense wear of its components.

ZIC XQ LS oil acts as a fairly balanced product with an affordable price. The liquid boasts an impressive list of additives, which ensures not only engine protection, but also the cleanliness of its internal cavities.

Which of the above oils is the best? What kind of oil should I put in the engine? Determining this is very problematic, because they are all worthy products. You can also choose another manufacturer, but the options we have presented are characterized by the greatest optimality in terms of the ratio of price parameters and quality conditions.

The first oil change in a new unit should be done after a mileage of 3 thousand km. The subsequent frequency of the procedure usually does not exceed 10 thousand km. For filling, we stock up on a volume equal to 3 liters. After replacement, we check the oil level and do not allow it to exceed the “F” mark. The main thing before changing is to decide what kind of oil to pour into the engine.

Replacement process

When you have decided which oil to pour into the engine, the question of replacement arises. To replace the fluid, it is not necessary to visit a service center, because this procedure can be performed independently.

1. To do this, place the car over the hole and unscrew the drain plug located on the surface of the pan.
2. Since the process requires the presence of a warm engine, we take safety measures into account so as not to burn our hands.
3. We place a suitable container under the drain and wait for the waste liquid to completely drain.
4. During this time, we manage to replace the filter of the unit’s lubrication system.
5. If you use a syringe with a piece of hose, you can pump out the remaining mud-oil liquid from internal cavity the bottom of the pallet. The procedure is not mandatory, but it certainly won’t be superfluous.
6. We tighten the drain plug, tightening it to the required specified torque, and proceed to pouring “fresh” lubricant.
7. We control the sufficiency of the level, not forgetting that it is inadmissible to exceed the previously indicated mark.

Let's sum it up

In the material we provided some advice regarding the right choice oil and change it yourself, but it’s up to you to decide what kind of oil to pour. The main point in selection is the correspondence between the characteristics of the liquid and the needs of the motor, which ensures compatibility and guarantees long-term operation of the unit. Feel free to choose a product from the list above, which will allow you to gain confidence in the “good health” of the engine throughout the entire regulated period of oil use.

If you are the owner of a 2011-2015 Kia Rio, then you are in luck - these models are equipped with very reliable and modern engines. However, it should be noted that without proper care, any motor will soon begin to fail and its capabilities will need to be forgotten.

One of the most important aspects in servicing power units on Kia Rio (including 2013 and 2014) is regular oil changes, and you can do this even more often than the manufacturer recommends. In our article we will look at what better oil fill in your car, what options are there and compare their pros and cons.

It is absolutely obvious that the oil must be changed regularly and in a timely manner. This is especially true for cars of 2011, 2012 and 2013, since they have been in operation for some time and the engine receives a serious load. The main indicator of an oil is its viscosity, which helps determine the degree of fluidity. By using the right oil, you can completely protect your engine from premature wear. For engines installed on Kia Rio, you need to use a product with a viscosity of 5W-30 or 5W-40. It is also advisable to always monitor the oil filter and change it at the same time as the oil, no matter what the condition.

Choosing engine oil

Before you run to the store and purchase a product from a specific company, you need to find out what characteristics the oil should have for use in the 2011-2015 Kia Rio. Taking these features into account, we have selected several suitable options that we will consider:

• Shell Helix Ultra.
• Total Quartz.
• Divinol.
• ZIC XQ LS.

The first option is one of best oils in terms of price-quality ratio. Analysis showed that this product has the required set of necessary substances and additives, and therefore its use for Kia motor Rio makes perfect sense. Moreover, Shell Helix Ultra oil does not lose its qualities for a long time and retains its protective properties, which is also a definite plus for this option.

Total Quartz also has impressive performance and is capable of keeping all engine components in excellent condition. The price of this product is small, but at the same time it works 100%. As with the previous option, the oil retains its characteristics even with fairly high mileage.

Divinol oil boasts low consumption. It should be noted that this brand is little known, but this does not affect its quality. Therefore, this option is perfect for your Kia Rio and will perform all its functions.

Another good product with affordable price is ZIC XQ LS. It has an impressive list of additives, and this directly affects the protection of the engine from wear. You can also safely pour it into the engine of your car.

It’s hard to say which oil is better, because they are all good. Of course, you can choose another oil, more expensive, but the options we presented are the most optimal for Kia Rio 2011-2015. The first replacement should be made after 3000 km, as this is enough to break in the engine. Subsequent replacements should be at least once every 10,000 km. In this case, you need to fill in approximately 3 liters of liquid, then check its level, and it should not be higher than the F mark.

Replacement process

You can change the oil either at a service station or do it yourself. The first option is much simpler, but it involves financial costs. If you don't want to pay, you can do everything yourself. To do this, you need to drive the car into the “pit” and unscrew the plug located on the engine pan. You need to be very careful here as the oil is hot and can harm you. When it has completely drained, you need to remove the filter.

After all these procedures have been completed, it is recommended to remove any remaining dirty oil from the pan. To do this, you can use a syringe with a curved tube on it. It should be noted that this is an optional procedure, but it certainly won’t be superfluous. Next, you need to pour fresh product into the Kia Rio engine and the car will not let you down.

Among other things, you will need to prepare the following tools and materials in advance:

• 1. Rubber gloves.
• 2. Newspapers and rags.
• 3. Bucket (to drain old oil into).
• 4. Socket wrench (to remove the plug from the pan).
• 5. Open-end wrench (for removing the filter).

So, we tried to give some advice on which oil to choose for the Kia Rio. As you can see, doing this and replacing it is not difficult. The main thing is to clearly know what characteristics are necessary for your engine and purchase only high-quality and suitable oil. Whichever one you choose from our list, you can be sure of its reliability.

If you bought a car, then you probably dream of an engine that can serve your “iron friend” for as long as possible. Therefore use lubricant for the engine - the most important question that worries any car enthusiast.

[Hide]

The best engine oil for Kia Rio

Viscosity, which is the main and main indicator of motor oil, can determine the degree of its fluidity. For any car, changing the engine oil must be timely. Engine oil for the Kia Rio 2014 provides complete protection of almost all internal engine components.

Do not forget that in Kia Rio 2013, 2012, 2014, as in other models, the oil filter should be replaced along with the lubricant.

Engine oil for Kia Rio is selected based on the data contained in the vehicle’s operating instructions.

Lubricants for Kia Rio 2013, 2012, 2014 can be considered budget and affordable options.

Shell Helix Ultra

Shell Helix Ultra can be called a leader among oils that have shown excellent results.
The liquid contains an optimal set of additives, which allows the use of motor oil in aggressive environments.

Starting the engine showed that the lubricant retained the properties declared by the manufacturer, which makes it possible to protect the engine.

Total Quartz

It has an equally worthy composition. In addition, this is an oil that is ready to cope with fuel to such an extent that a high percentage of sulfur will not interfere with it. It can be praised for both quality and price.

High mileage cannot destroy the working properties of the lubricant.

Divinol

Divinol is an engine oil that offers the lowest consumption as well as excellent engine wear protection. The level of alkalinity and acidity also attracts attention.

One can, of course, complain about the not-so-good promotion of the brand, however, one can note the fact that owners of Rio 2013, 2012, 2014 are increasingly using the appropriate composition of this product.

ZIC XQ LS

LS is a product with a reasonable price and good quality. The oil has quite a considerable resource of additives and sufficient reliable protection from engine wear.
However, there is a fact that the substance is not approved.

How much to fill

In a new car, the first lubricant change is made after three thousand kilometers, since during this period the engine is run-in and run-in, as a result of which abrasive particles appear in it, which must be removed.

In the future, the lubricating fluid is replaced at intervals of every 10 thousand kilometers.

As a rule, during the procedure, approximately 3 liters of petroleum product are poured into the engine.

You should check the lubricant level, which should not exceed the “F” mark.

Replacement steps

Before you start changing the lubricant, you must be sure that you are using a lubricant product recommended by the Kia Rio manufacturer. Do not forget that along with the purchase of a lubricant you must purchase an oil filter, since using an old filter is not recommended!

For self-replacement It is convenient to use the inspection hole for lubricant. In its absence, jack up your Kia Rio.

What tools will you need?

• When changing engine oil, use rubber gloves;
• you will need a socket wrench, which is necessary in order to open the drain plug;
• an open-end wrench is suitable for replacing the oil filter;
• dirty lubricant must flow into some container, which can be a bucket or bottle;
• stock up on newspapers and rags.

How to drain oil correctly

During such a procedure, care is important to avoid getting burned by hot oil.

1. An automatic transmission requires the “Parking” mode to be set, and a manual transmission requires the handbrake to be engaged.
2. The key will help you loosen the crankcase plug. The plug gasket should not stick to the pan. Installing a plug without a gasket risks that the working substance will gradually leak in the future.
3. Next, you need to unscrew the engine sump plug, and then allow the used lubricating fluid to drain, for which you must place a container under the drain hole.
4. Use a syringe to pump out any remaining dirty grease from the pan.

How to fill

As soon as the fluid has drained, unscrew the oil filter, pour fresh lubricant into the new one, and then tighten the filter.

If you cannot unscrew the old filter by hand, then it is better to do it using a special puller or other convenient and accessible way.

Lubricate the filter rubber with oil.

A new gasket for the pan plug is also needed.

After opening the hood of the car, pour 3 liters of lubricant into the engine through the neck, then start the car for a few seconds, and make sure that dashboard The oil can went out.

You can look under the car with the engine running and make sure that the substance is not leaking.

Video “How to change the oil in a Kia Rio”

Read more in the video on how to change the oil in a Rio engine.