What kind of oil is best for bmw. Original oil for bmw car

Many car enthusiasts are wondering how to choose the right oil for BMW. Therefore, it is necessary to analyze this problem in more detail. Note that engine fluids for various BMW models should be conditionally divided into special motor oils and certified, that is, with a tolerance.

When it comes to the performance specifications of the oil, then for the BMW 1-7 series greases that have passed laboratory tests for quality and strength, as well as received official confirmation from a German company, are applicable.

As for cars with diesel engines, the use of universal motor oils is allowed here if they fully comply with the operating instructions for a particular vehicle model.

Any oil for BMW must have a special approval. If there is none, then this means that the German car manufacturer has not confirmed the quality certification and it is better not to use such a liquid. Certified motor oils from BMW have a special name Longlife.

They fully comply with the international specifications ACEA B3 / A3, passed special tests, as a result of which the car increased its working life before performing MOT, Oil Service. Recommended in summer and winter, depending on the choice of viscosity grade.

BMW oils

Since 2001, the BMW concern has begun to produce modernized units that correspond to new trends in the use of car oil. Thus, special oils were developed, divided into four groups, depending on the service life and car model:

Longlife 01

This group of car oils fully complies with technical specifications and the requirements of BMW cars. Recommended for use in internal combustion engines N42 and N62, that is, in cars of the 3 series and e59. Also recommended for pouring into old engines on e39 and m43.

Longlife 01FE

These are almost complete analogues of Longlife01, but they are characterized by a lower degree of viscosity, due to which they provide low fuel consumption. In addition, this group is only valid for vehicles with engines that accept low level viscosity.

Longlife 98

These are motor fluids that fully meet international standards for increased vehicle operation until the moment of maintenance. They were introduced in 1998, therefore they are recommended for internal combustion engines with a forced ignition system, for example, e39, made before 2000.

Longlife 04

These motor oils have passed the entire cycle of BMW laboratory tests. Recommended for use in updated car models. It is undesirable to use them in older versions made before 2004.

As well as certified, special additives fully comply with the accepted quality standards ACEA B3 / A3. Longlife 04 is the earliest version of them all. Special Oils are recommended for use on older versions of cars with replacement intervals of up to 15,000 km.

Engine oils for BMW X5

Released in 1999, the X5 models are the prototypes of the highly popular luxury SUVs. The first versions of cars with the E53 body had a number of technological advantages previously used in prestigious jeeps. Land rover belonging to the BMW concern.

The second E70 body modifications were released in 2007, and the third generation in the 2013 F15. The main production is located in the USA, and since 2009 some models have been assembled in the Kaliningrad region.

The X5 runs on diesel and gasoline engines of 3 and 4.8 liters with two working axles. Cars in the F15 body are equipped with 2 liter diesel engines. Depending on the car model, it is necessary to select one or another car oil. When it comes to a highly efficient and alternative Longlife, then Total Quartz 9000 should be used.

Total Quartz 9000

It is a high performance oil, one of the best for BMW X5 powertrains. It can be filled in both gasoline and diesel internal combustion engines, produced in 2003.

Fully complies with Longlife01 international certificates and ACEA B4 / A3 requirements. Effectively protects the motor from premature wear under any operating conditions of the vehicle.

The high level of fluidity of the oil allows it to be used regardless of the season, especially in cold weather. In addition, it qualitatively cleans the engine from various deposits and prevents the formation of new deposits.

Total Quartz greases are suitable for maximum drain intervals when recommended by BMW.

Some BMW oils are multigrade oils. Exceptions are SAE 10wx formulations. Their use is allowed on BMW vehicles with temperature conditions not lower than 20 ° C.

Do not forget that most cars are recommended to be filled with lubricants that meet the Longlife factory specifications. Even if the oil is synthetic and has little fluidity, this does not mean that it is applicable to BMW.

The exclusive factor in the use of a particular lubricant is the manufacturer's approval.

Oil for BMW E60

In 2007, German manufacturers decided to make some changes to the exterior of the BMW E60. Thus, the interior design has changed, the shape of the bumper has been improved, the optics have been improved. After the update, the car was no longer modernized, and the plant began production of new versions in the F10 body.

In a technical context, the 5th generation BMW was practically not distinguished by a variety, since the main components and parts were used from the old trim levels.

On the vehicles diesel engines with volumes from 2 to 3 liters were installed, giving out power up to 286 hp. Gasoline engines with volumes from 2 to 5 liters have power from 170 to 507 hp.

The models proved to be very sensitive, so the manufacturers recommended the use of synthetic oils with different viscosity levels.

Main characteristics and types of oils for the 5th generation

• synthetic base;
• viscosity level 5w30, 5w40;
• consumption - up to 4.25 liters;
• consumption - up to 700 ml / 1000 km of run.
• replacement interval - upon reaching 10,000 km.

M54 2.2 engine:

• synthetics from the manufacturer;
• viscosity level 5w40, 5w30;
• filling volume - 6.5 liters;
• consumption - up to 1 liter per 1000 km;
• replacement frequency - up to 10,000 km.

Powertrain N52 B25:

• original factory oil on a synthetic basis;
• oil consumption 1 liter per 1000 km;
• viscosity class 5w30, 5w40;
• replacement frequency - 10,000 km.

Rating of automotive oils for BMW

Motul 8100

One of the most popular synthetic oils for BMW cars is Motul 8100. This line is effectively used for many versions of vehicles.

Liqui Moly 5w40

German oil Liquid Moli on a synthetic basis with a viscosity class of 5w40 is perfectly used on BMW power units. This is one of the most expensive motor fluids containing molybdenum and detergent-dispersant additives. Its use can reduce wear by up to 50%.

Mobil 1

Mobile 1 motor lubricant is also very popular among German car owners. New low-viscosity formulations with a viscosity class of 0w40 have proven themselves perfectly in European territory under difficult road conditions.

In addition, the oil protects the engine from the transformation of coarse particles and further damage. Periodic replacement ensures long-term and trouble-free operation of the BMW.

If you do not use the above recommendations for changing the oil on BMW cars, then the owners can reduce the operating potential of the power unit. Since the incorrect use of the lubricant can lead to rapid wear and deformation of the system.

Therefore, choosing lubricant, pay special attention to factory recommendations and specifications.

What you need to know when choosing oil for BMW engines? Which oil is right for a particular engine? It is these two questions that most concern BMW owners who have not decided on the choice of oil when its planned replacement is approaching. First of all, it should be remembered that engine oils for BMW are divided into certified(admitted) and special(Special Oil). Moreover, according to the specifications of the automaker, for gasoline modifications of the BMW 1,3,4,5,6,7 series, only those engine oils that have passed special tests and received official BMW approval are allowed. For diesel versions of the same models, the use of universal engine oils is allowed, provided that they meet the requirements of the documentation for each car model (according to the ACEA classification). For engine oil approved by BMW, the appropriate tolerance must be indicated on the packaging. Its absence indicates the absence of BMW certification, therefore its use is not recommended.

BMW approved oils are named Longlife... These oils meet ACEA: A3 / B3 specification standards and have been tested by BMW for their extended oil life. Maintenance(OilService). The use of these oils is allowed both in summer and winter.

Since 2001, BMW began to produce engines of a new generation, which entailed stricter requirements for the properties of the oil. As a result, long-life oils were divided into four categories:

& nbsp & nbsp & nbsp1. Longlife-01- oils that meet the full list of BMW requirements for technical fluids and are recommended for use in N62 / N42 engines. In addition, these oils are recommended for use in old BMW engines (manufactured before February 2000), except for S62 (e39), CNG, M43.

& nbsp & nbsp & nbsp2. Longlife-01 FE (Fuel Economy)- oils with the same standards as Longlife-01, but with a lower viscosity, which results in lower fuel consumption. The use of these oils is allowed only in those engines, the design features of which allow the use of oil with a low viscosity.

& nbsp & nbsp & nbsp3. Longlife-98(originally named Longlife) are oils that meet Extended Service Interval (OilService) standards introduced in 1998. The use of these oils is recommended for BMW with engines equipped with positive ignition (except S54, N42, as well as S62 (e39) manufactured before February 2000).

& nbsp & nbsp & nbsp4. Longlife-04- this tolerance was introduced for engine oils that have passed a hollow test cycle at BMW. Oils with this approval can be used in modern BMW engines and are not recommended for cars manufactured before 2004.

Category special oils as well as the certified one, it complies with the ACEA: A3 / B3 specification standards and is an earlier version of BMW Longlife oils. The use of special oils is recommended for older BMW models with drain intervals of up to 15,000 kilometers (according to OilService regulations). Special oils are multigrade. The exception is oils with a viscosity grade SAE 10W-X - its use is allowed at an ambient temperature of at least 20 ° C.

It should be remembered that for BMW engines it is recommended to use only engine oils that meet the above recommendations. The presence in the name of oils of such formulations as "fully synthetic (low-flow) engine oil", etc., does not indicate the possibility of their use in BMW engines and can only be considered as a general name. The decisive factor in determining the conformity of the oil can only be a reference to the approval from BMW.

In conclusion, a few words about oils for new cars and engines after overhaul. And if hardly anyone will make an independent oil change outside the official service in new cars, then for owners of BMW with engines after the "capital" it will not hurt to know that so-called "break-in" oils are not used in BMW engines. Therefore, when changing the oil in engines after a major overhaul (as well as for new engines), it is recommended to use only the above certified oils.

What you need to know when choosing oil for BMW engines? Which oil is right for a particular engine? It is these two questions that most concern BMW owners who have not decided on the choice of oil when its planned replacement is approaching. First of all, it should be remembered that engine oils for BMW are divided into certified(admitted) and special(Special Oil). Moreover, according to the specifications of the automaker, for gasoline modifications of the BMW 1,3,4,5,6,7 series, only those engine oils that have passed special tests and received official BMW approval are allowed. For diesel versions of the same models, the use of universal engine oils is allowed, provided that they meet the requirements of the documentation for each car model (according to the ACEA classification). For engine oil approved by BMW, the appropriate tolerance must be indicated on the packaging. Its absence indicates the absence of BMW certification, therefore its use is not recommended.

BMW approved oils are named Longlife... These oils meet ACEA: A3 / B3 specification standards and have been tested by BMW for their ability to provide extended service intervals (OilService). The use of these oils is allowed both in summer and winter.

Since 2001, BMW began to produce engines of a new generation, which entailed stricter requirements for the properties of the oil. As a result, long-life oils were divided into four categories:

& nbsp & nbsp & nbsp1. Longlife-01- oils that meet the full list of BMW requirements for technical fluids and are recommended for use in N62 / N42 engines. In addition, these oils are recommended for use in old BMW engines (manufactured before February 2000), except for S62 (e39), CNG, M43.

& nbsp & nbsp & nbsp2. Longlife-01 FE (Fuel Economy)- oils with the same standards as Longlife-01, but with a lower viscosity, which results in lower fuel consumption. The use of these oils is allowed only in those engines, the design features of which allow the use of oil with a low viscosity.

& nbsp & nbsp & nbsp3. Longlife-98(originally named Longlife) are oils that meet Extended Service Interval (OilService) standards introduced in 1998. The use of these oils is recommended for BMW with engines equipped with positive ignition (except S54, N42, as well as S62 (e39) manufactured before February 2000).

& nbsp & nbsp & nbsp4. Longlife-04- this tolerance was introduced for engine oils that have passed a hollow test cycle at BMW. Oils with this approval can be used in modern BMW engines and are not recommended for cars manufactured before 2004.

Category special oils as well as the certified one, it complies with the ACEA: A3 / B3 specification standards and is an earlier version of BMW Longlife oils. The use of special oils is recommended for older BMW models with drain intervals of up to 15,000 kilometers (according to OilService regulations). Special oils are multigrade. The exception is oils with a viscosity grade SAE 10W-X - its use is allowed at an ambient temperature of at least 20 ° C.

It should be remembered that for BMW engines it is recommended to use only engine oils that meet the above recommendations. The presence in the name of oils of such formulations as "fully synthetic (low-flow) engine oil", etc., does not indicate the possibility of their use in BMW engines and can only be considered as a general name. The decisive factor in determining the conformity of the oil can only be a reference to the approval from BMW.

In conclusion, a few words about oils for new cars and engines after overhaul. And if hardly anyone will make an independent oil change outside the official service in new cars, then for owners of BMW with engines after the "capital" it will not hurt to know that so-called "break-in" oils are not used in BMW engines. Therefore, when changing the oil in engines after a major overhaul (as well as for new engines), it is recommended to use only the above certified oils.

Despite the experience and a wide variety of lubricant products, owners often get stumped when choosing engine oil for BMW, not understanding which one is best suited for the engine. On the one hand, you need to fill in what the automaker recommends. On the other hand, the recommendation is not very clear, since there are recommended and admitted ones. Moreover, a tolerance is issued to almost all compositions that correspond in quality and viscosity characteristics.

So, every driver of such a car should know that lubricants for a BMW car are divided into two groups:

1. Certified, they are also recommended;
2. Permitted, or Permitted.

According to the manufacturer's specifications, BMW petrol models are allowed to be injected with oils that have passed laboratory tests and received official BMW confirmation. This group includes almost all motor oils, ranging from semi-synthetics with API SJ, SH class, to SAE 10W-40 and higher.

In cars equipped with a diesel installation, it is allowed to use a universal fluid if its characteristics meet the requirements of the vehicle's technical documentation. The ACEA standard is taken as a basis. An engine oil that has been approved by BMW must be printed on the packaging. If it is absent, therefore, the oil has not passed BMW certification, it is prohibited to use it.

The certified lubricants are called Longlife. Properties comply with the current ACEA-A3, B3 standard. They have been tested in the BMW laboratory, are designed for long-term use, and are classified as all-season.

What kind of oil to fill in BMW

Starting in 2001, the BMW concern began to produce completely new power plants. For them, it was required to develop new lubricating products with more stringent requirements. The result is several types of oils that are distinguished by a long service life.

Longlife-01

The technical characteristics of the grease meet all BMW requirements and can be used in cars equipped with the N62 - N42 engine. Can also be used in early BMWs produced before 2000. The exceptions are S62, CNG, M43.

Longlife-01 FE

It differs from Longlife-01 in its very low viscosity index. Promotes economical consumption of the fuel used. It may only be used in installations capable of operating on lubricants with low viscosity.

Longlife-98

The technical parameters correspond to the OilService standard, which came into effect after the onset of 1998. Applicable in cars equipped with positive ignition. It is forbidden to pour into power units S54, N42, S62.

Longlife-04

This approval applies to engine oils that have been tested in the BMW laboratory. These products can be safely poured into latest cars... Do not use in cars manufactured before 2004.

Compositions belonging to the Special Oil group, similarly to certified products, meet the requirements of ACEA-A3, B3. Basically, this is an early version of the BMW Longlife series.

Professionals advise such lubricants to be poured into the engine of obsolete BMW cars. The replacement period should not exceed 15,000 km. All special oils belong to the multigrade group. The exception is SAE 10W-X. It can only be used at temperatures over 20 degrees.

When choosing which oil to fill in a BMW engine, it is better to use only the above oils. As good as any other lubricant, if there is no BMW approval on the packaging, it is strictly forbidden to use it.

A few words about cars that have undergone major repairs. There is no break-in oil for BMW engines. You can immediately fill in quality certified. Each driver selects the brand individually, adhering to the above recommendations.

Very often there are questions about what kind of oil to pour into a BMW engine. What to pour and how to pour. On the forums, the branches with the choice of oil are quite large, there is a huge debate that this should be poured, but this should not be. Here I would like to express my dilettan opinion on this matter.

Scrolling through the E34.SU forum, I highlighted several oils and the theory of what we need to pour and what not.

So, pouring completely synthetic oil into BMW engines, with a viscosity index better than 40-50.

A viscosity index of 60 can be detrimental to older engines. Since the engines have a large amount of carbon deposits, and the oil is very thick, as a result, all channels of the oil "circulation" are clogged. But at the same time, with this oil, the amount of noise from the engine can be reduced and perhaps it will stop eating too much of it.

A viscosity index of 30 will be too liquid and the engine will probably “eat” oil a lot. Usually oils with this index are semi-synthetics.

You need to change the oil every 7-10t.km.

It is not recommended to flush the engine with special products. Because the engine is old, this tool may kill it. In the same time good oil has a means for cleaning the engine. And it will be better to change it more often than to rinse it. Slight mixing of oil (for example, when changing the oil, oil remains in the engine when draining) of different manufacturers and different types is permissible.

The oil must comply with BMW Longlife-01 certification

So, now the oil producers that I have highlighted:
Motul 8100 X-cess 5W-40
Mobil 1 Peak Life 5W-50
Castrol EDGE SAE 0W-40
Castrol SLX Professional Longtec 0W-40
Liqui Moly Molygen 5W-50

But in Russia, the production of oil under the Castrol company differs from the oil that is produced in Germany. Therefore, if you want to pour Castrol, then better pour original BMW oil, it does not cost so much space money.

All these oils are good, to some extent, if you buy them in trusted places, from authorized dealers. And not in the transition for 100 rubles.

Recommended engine oils for BMW Group engines
http://tis.bmwcats.com/doc1104549/
There is a firm of oils Shell, Total, Elf, Aral, BP, Agip, Addinol.

In fact, the choice of oil is an individual lesson, you can pour the mineral water TAZovskuyu, and think that you have a BMW. And then tell everyone that BMW is an expensive car for the service staff, because you had to capitalize on the engine.